HDMI-TPX-TX106A
Model91580003
Explore the HDMI-TPX-TX106A extender, supporting 4K UHD @60Hz video, bi-directional PoC, and extending HDMI signals up to 100m over a single CATx cable
Models compared.
| Video inputs | |
|---|---|
| HDMI input | |
| Connector type | 19-pole HDMI Type A receptacle |
| A/V standard | DVI 1.0, HDMI 1.4, HDMI 2.0 |
| HDCP compliance | HDCP 2.3 |
| Color space | RGB, YCbCr |
| Video delay | 0 frame |
| Supported resolutions at 8 bits/color * | |
| up to 4096x2048@60Hz (4:4:4) | |
| up to 3840x2160@60Hz (4:4:4) | |
| 4096x2048@60Hz (4:2:2) up to 10 bits/color | |
| Reclocking | Pixel Accurate Reclocking |
| 3D support | yes |
| Audio formats | All HDMI 2.0 formats including multi-channel PCM, Dolby True-HD and DTS-HD master audio |
| EDID management | |
|---|---|
| EDID emulation | yes, dynamic EDID from connected receiver and 1 locally stored EDID |
| EDID memory | 1 stored EDID |
| Supported standard | EDID v1.3 |
| Video Outputs | |
|---|---|
| TPX output | |
| Connector type | RJ45 connector |
| Power over Ethernet (PoE) | PoC (can send and receive power) |
| Compliance | SDVoE |
| HDCP compliance | HDCP2.3 |
| Transferred signals | Video, Audio, RS-232, Infrared, Ethernet |
| Color space | RGB, YCbCr |
| Video delay | 0 frame |
| Supported resolutions at 8 bits/color * | up to 4096x2048@60Hz (4:4:4) |
| up to 3840x2160@60Hz (4:4:4) | |
| 4096x2048@60Hz (4:2:2) up to 10 bits/color | |
| Audio formats | All HDMI 2.0 formats including multi-channel PCM, Dolby True-HD and DTS-HD master audio |
| Analog audio output | |
|---|---|
| Connector type | 5-pole Phoenix connector |
| Audio formats | 2-ch PCM |
| Sampling frequency | 48 kHz |
| Volume | -78 dB - 0 dB |
| Balance | 0 - 100 (50 = center) |
| Nominal Differential Output Level @ 0 dB Gain | +4 dBu |
| Nominal Differential Output Level @ 3 dB Gain | +7 dBu |
| Control Ports | |
|---|---|
| RS-232 serial port | |
| Connector type | 3-pole Phoenix connector |
| Baud rates | Between 4800 and 115200 Baud |
| Data bits | 8 or 9 |
| Parity | None / Odd / Even |
| Stop bits | 1 / 1.5 / 2 |
| Ethernet port | |
| Connector type | RJ45 female connector |
| Ethernet data rate | 10/100/1000Base-T, full duplex with autodetect |
| Infrared port | |
| Output connector type | 3.5 mm TS (approx. 1/8" jack) |
| Input carrier frequency | 38 kHz |
| Output signal | modulated (38kHz) |
| Power | |
|---|---|
| Power supply option | Power adaptor / PoC |
| Supported power source | |
| Power consumption (max) | 8.1W |
| Power consumption (min) | |
| Heat dissipation | 27.6 BTU/h (max) |
| AC power connector | |
| AC fuse | |
| Power over Ethernet (PoE) | via TPX output (IEEE802.3af) (can send and receive power) |
| Power adaptor | |
| Supported power source | 100-240 V AC; 50/60 Hz |
| Supplied power | 12V DC, 2A |
| AC power plug | Interchangable (EU, UK, JP/US, AUS/NZ) |
| DC power plug | Locking DC connector (2.1/5.5 mm pin) |
HDMI-TPX-TX106ALightware · EQ-480Need this priced for your project?
- Quantity and site
- Configuration and interfaces
- Quotation
























