HDMI-TPN-RX107D-SR
Model91710008
Explore the HDMI-TPN-RX107D-SR, an SDVoE compatible HDMI 2.0 scaling receiver that supports 4K UHD video, Dante audio, and seamless switching
Models compared.
| General | |
|---|---|
| Compliance | UL, CE |
| Electrical safety | IEC/EN/UL/CSA 62368-1:2014, Class II |
| EMC (emission) | IEC/EN 55032:2015 |
| EMC (immunity) | IEC/EN 55035:2017 |
| RoHS | EN 63000:2018 |
| Warranty | 3 years |
| Operating temperature | 0° to +50°C (+32° to +122°F) |
| Storage temperature | -30° to +80˚C (-22° to +176˚F) |
| Operating humidity | 10% to 90%, non-condensing |
| Cooling | passive |
| Power | |
|---|---|
| Power supply option | Power adaptor / PoE+ |
| Power consumption (max) | 22 W |
| Heat dissipation | 75.1 BTU/h |
| Power over Ethernet (PoE+) | via TPX input (IEEE802.3at) (can receive power) |
| Supported power source | 100-240 V AC; 50/60 Hz |
| Supplied power | 12V DC, 2A |
| AC power plug | Interchangable (EU, UK, JP/US, AUS/NZ) |
| DC power plug | Locking DC connector (2.1/5.5 mm pin) |
| Enclosure | |
|---|---|
| Rack mountable | No |
| Enclosure material | 1 mm steel |
| Dimensions in mm | 138 W x 151.8 D x 26 H |
| Dimensions in inch | 5.43 W x 5.98 D x 1.02 H |
| Weight | 604 g (1.42 lbs) |
| Video Inputs | |
|---|---|
| TPX Input | |
| Connector type | RJ45 connector |
| Power over Ethernet (PoE+) | IEEE 802.3at (PD) |
| Compliance | SDVoE (point-to-point) |
| HDCP compliance | HDCP2.3 |
| Transferred signals | Video, Audio, RS-232, Infrared, Ethernet |
| Color space | RGB, YCbCr |
| Video delay | 0 frame |
| Supported resolutions at 8 bits/color * | up to 4096x2048@60Hz (4:4:4) |
| up to 3840x2160@60Hz (4:4:4) | |
| 4096x2048@60Hz (4:2:2) up to 10 bits/color | |
| Audio formats | All HDMI 2.0 formats including multi-channel PCM, Dolby True-HD and DTS-HD master audio |
| * The horizontal resolution for signals above the bandwith limit of HDMI 1.4 cannot exceed 4096 pixels. |
| Video Outputs | |
|---|---|
| HDMI Output | |
| Connector type | 19-pole HDMI Type A receptacle |
| A/V standard | DVI 1.0, HDMI 1.4, HDMI 2.0 |
| HDCP compliance | HDCP 2.3 |
| Color space | RGB, YCbCr |
| Supported resolutions at 8 bits/color * | up to 4096x2048@60Hz (4:4:4) |
| up to 3840x2160@60Hz (4:4:4) | |
| 4096x2048@60Hz (4:2:2) up to 10 bits/color | |
| Audio formats | All HDMI 2.0 formats including multi-channel PCM, Dolby True-HD and DTS-HD master audio |
| Scaling | Scaling to EDID preferred resoltion or custom resolution with the following limitations: * When scaling is used, the scaler output is always RGB 8 bit/component. * A picture with resolution of 3840 x 2160 cannot be scaled down to 640 x 480, 800 x 600, 960 x 1280, 1024 x 768, 1050 x 1400, or 1200 x 1600 when the aspect ratio is kept by utilizing letterbox. * A picture with resolution of 4096 x 2160 cannot be scaled down to 640 x 480, 800 x 600, 960 x 1280, 1024 x 768, 1050 x 1400, 1200 x 1600, 1280 x 768, 1680 x 1050, or 1900x1200 when the aspect ratio is kept by utilizing letterbox. |
| * All standard VESA and CEA resolutions up to 600MHz (HDMI2.0) and other custom resolutions up to 600Mhz are supported. |
| Audio Port | |
|---|---|
| Dante®/AES67 Output Port | |
| Number of ports | 1 |
| Connector type | RJ45 female connector |
| Audio formats | Dante® or AES67 |
| Supported channels | 2-channel stereo |
| Sampling rates | 44.1, 48, 88.2, 96 kHz |
| Control Ports | |
|---|---|
| RS-232 serial port | |
| Connector type | 3-pole Phoenix connector |
| Baud rates | Between 4800 and 115200 Baud |
| Data bits | 8 or 9 |
| Parity | None / Odd / Even |
| Stop bits | 1 / 1.5 / 2 |
| Ethernet port | |
| Connector type | RJ45 female connector (2) |
| Ethernet data rate | 10/100/1000Base-T, full duplex with autodetect |
| Power over Ethernet (PoE) | No |
Documents and files.
Datasheets, manuals, drawings and certificates as the manufacturer publishes them.
HDMI-TPN-RX107D-SRLightware · EQ-495Need this priced for your project?
- Quantity and site
- Configuration and interfaces
- Quotation























