Pro Convert HDMI Plus
Model640200000
Converts an HD HDMI input signal into Full NDI® with loop-through
What this product is, in numbers.
The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.
01General4
- NDI Studio Monitor
- OBS
- vMix
- Any other NDI-enabled product
02Video17
- Max input & loop through signal
- 4096 × 2160 30 fps 4:4:4/4:2:2
- 4096 × 2160 60 fps 4:2:0
- Input video at any format by custom EDID of input port
- Video formats
- RGB, YUV BT.601/709/2020
- 8-channel HDMI-embedded audio
- HDMI interfaces
- HDMI 1.4, DVI-D
- Encoding NDI High Bandwidth real-time stream at up to 2048 × 2160 120 fps 4:2:2 8-bit
- Output the same resolution as input or any custom resolution. Typical outputs include
- 2048 × 1080p/1920 × 1080p 23.98/24/25/29.97/30/50/59.94/60
- 1280 × 720p 23.98/24/25/29.97/30/50/59.94/60/100/119.88/120
- 1920 × 1080i 25/29.97/30/50/59.94/60
- 720 × 480p/720 × 480i 59.94/60/119.88/120
- 720 × 576p/720 × 576i 50/100
- Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate
- Encoding 8-channel NDI-embedded audio
- Support NDI 6.3
03Control and interfaces21
- Register with Control Hub
- Remote control via WebUI and Control Hub
- Provide comprehensive information regarding the device and input signals in real-time
- Allow to configure how an input is processed and encoded, including deinterlacing, EDID, up/down scaling, frame rate, aspect ratio, as well as the network connection
- Update firmware
- Support USB RNDIS/ECM
- Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
- Provide HTTP APIs
- 16 position rotary DIP switch
- set board-index from 0 to F
- Control PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI
- Mini-DIN–8 jack (shared with Tally light)
- 10/100/1000 Mbps Ethernet
- IEEE 802.3af PoE
- USB2.0 Type B
- 5 V/2.1 A power supply
- USB RNDIS/ECM
- Status LEDs indicate
- Power supply
- on/off
- Tally
- preview/program
- Input signal
- locked/unlocked
- Loop through signal
- device connected and signal detected/undetected
04Power2
- 5V max current
- ~1.5 A
- Max power consumption
- ~8 W
Show the full specificationHide the rest of the specification3 more groups · 10 values
05Physical2
- Dimensions (L × W × H)
- 117.5 × 66.7 × 23.4 mm
- Screw mounting hole
- ¼–20 threaded hole
06Environment3
- Operating temperature
- 0 to 45 deg C
- Storage temperature
- –20 to 70 deg C
- Relative humidity
- 5% to 90% non-condensing
07Packaging5
- USB 2.0 A to B cable
- 5 V/2.1 A power adaptor
- Mini-DIN 8 breakout cable
- Tally light
- L-bracket
What it is.
- Supports up to 4096x2160 60fps (4:2:0) or 30fps (4:4:4), down-converting them to HD NDI
- Connects existing source equipment into NDI-enabled, IP-based media networks
- Plug-and-play ease of use with automatic input format detection and DHCP network configuration
Documents and files.
Datasheets, manuals, drawings and certificates as the manufacturer publishes them.
In the same range.
EQ-631MagewellPro Convert HDMI 4K Plus640100000 · Encoders, decoders and streaming
EQ-633MagewellPro Convert SDI 4K Plus640300000 · Encoders, decoders and streaming
EQ-630MagewellPro Convert IP to USB623000000 · Encoders, decoders and streaming
EQ-634MagewellPro Convert SDI Plus640400000 · Encoders, decoders and streaming
Pro Convert HDMI PlusMagewell · EQ-632Need this priced for your project?
- Quantity and site
- Configuration and interfaces
- Quotation



























