Pro Convert Audio DX
Model642600000
A multi-format IP audio converter and capture device (Dante® enabled)
What this product is, in numbers.
The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.
01Video24
- Support for sample rates of 96/48/88.2/44.1 KHz, and 16/24bit sample depth
- 1 × 2-channel 3.5 mm TRS unbalanced in (5k Ohm)
- 1 × 2-channel 4.4 mm TRRRS balanced in (20k Ohm)
- 1 × 4-channel 24-bit/48k USB Audio Class in
- Receiving 8-channel 24-bit Dante® flows in unicast or multicast
- Receiving 2 × 4-channel 16-bit network audio streams of SRT/NDI®/RTSP/RTMP(S)/TS over UDP TS over RTP/HTTP(S) simultaneously
- Support for PTP master/slave (Dante)
- Total harmonic distortion < 0.01% @ +4 dBu
- Frequency Response 20 Hz ~ 20 kHz (-/+0.5 dB)
- Signal to noise ratio > 100 dB
- Dynamic range > 100 dB
- Max signal level
- unbalanced at 12 dBu, balanced at 24 dBu
- Support for sample rates of 96/48/88.2/44.1 KHz, and 16/24bit sample depth
- 1 × 2-channel 3.5 mm TRS unbalanced out (10 Ohm)
- 1 × 2-channel 4.4 mm TRRRS balanced out (150 Ohm)
- 1 × 4-channel 24-bit/48k UAC out
- Encoding 8-channel 24-bit Dante® flows in unicast or multicast
- Encoding 2 × 4-channel 16-bit network audio streams of SRT/NDI®/RTSP/RTMP(S)/TS over UDP/TS over RTP protocols simultaneously
- Support for PTP master/slave (Dante)
- Total harmonic distortion < 0.01% @ +4 dBu
- Frequency Response 20 Hz ~ 20 kHz (-/+0.5 dB)
- Dynamic range > 100 dB
- Signal to noise ratio > 100 dB
- Max signal level
- unbalanced at 12 dBu, balanced at 18 dBu
02Control and interfaces23
- Support for Dante Domain Manager and Dante Controller, providing signal routing and configuration
- Registration with Control Hub
- Remote control via WebUI and Control Hub
- Provision of comprehensive information regarding the device and signals in real-time
- Configuration of how an input is processed and codec, including volume setting, audio matrix, buffer, as well as the network connection
- Support for updating firmware
- Support for USB NET
- Support for IE/Edge/Firefox/Chrome/Safari/Opera web browsers
- Provision of HTTP APIs
- 10/100/1000 Mbps with PoE (IEEE 802.3af)
- USB2.0 Type B
- 5 V/2.1 A power supply
- USB NET
- 3.5 mm TRS unbalanced IN/OUT
- 4.4 mm TRRRS balanced IN/OUT
- Power LED indications
- On
- power on
- Off
- power off
- PTP LED indications
- On
- synced
- Off
- not synced
- Blinking
- syncing
- 16 position rotary DIP switch
- set board-index from 0 to F
03Power2
- 5V max current
- ~ 1 A
- Max power consumption
- ~ 5 W
04Physical2
- Dimensions (L × W × H)
- 100.9 × 60.2 × 23.3 mm
- Screw mounting hole
- ¼–20 threaded hole
05Environment3
- Operating temperature
- –10 to 50 deg C
- Storage temperature
- –20 to 70 deg C
- Relative humidity
- 5% to 90% non-condensing
06Packaging5
- 4.4 mm to Dual XLR Male Cable
- 4.4 mm to Dual XLR Female Cable
- USB 2.0 cable (Type A to Type B)
- Universal power adapter
- L bracket
Show the full specificationHide the rest of the specification0 more groups · 0 values
What it is.
Offers a seamless bridge between analog audio, software and IP standards including Dante®, NDI®, SRT and more
Provides a flexible, virtual audio matrix to allow routing or mixing of any analog or IP-based input channel to any output
Enables mixed-technology local and remote production workflows and ProAV installations
Documents and files.
Datasheets, manuals, drawings and certificates as the manufacturer publishes them.
In the same range.
Pro Convert Audio DXMagewell · EQ-1139Need this priced for your project?
- Quantity and site
- Configuration and interfaces
- Quotation































