SW-UPG-5-MALE firmware upgrade tool for the shutter, 5-pin male
Model929024
The SW-UPG is a useful tool for the upgrade of the firmware. The software upgrade is done using a cable with the DMX connector on one side and the USB connector on the other side.
What this product is, in numbers.
The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.
01Orderable variant4
- Product code
- 929024
- Model
- SW-UPG-5-MALE
- Configuration
- SW-UPG-5-MALE 5-pin male
- Variant group
- 5-pin XLR connector
Show the full specificationHide the rest of the specification0 more groups · 0 values
What it is.
Description
The SW-UPG is a useful tool for the upgrade of the firmware. The software upgrade is done using a cable with the DMX connector on one side and the USB connector on the other side. The DMX connector is plugged into the device and therefore comes in 3, 5 and 7-pin versions to fit into every device. The USB connector is connected to the computer and the upgrade is done via freely downloadable software.
Contact us for the free software.
Documents and files.
Datasheets, manuals, drawings and certificates as the manufacturer publishes them.
In the same range.
EQ-5997SRSSW-UPG-5-FEMALE firmware upgrade tool for the shutter, 5-pin female929011 · Control and signal
EQ-6003SRSVLAN-toolbox 8-2 VLAN-toolbox, switch user interface929100 · Power distribution and dimmers
EQ-5993SRSSHUTT ON.OFF-5 projector shutter / dowser, 5-pin XLR connector929004 · Control and signal
EQ-6010SRSVLAN-toolbox 24-4 VLAN-toolbox, switch user interface929110 · Power distribution and dimmersNeed this priced for your project?
- Quantity and site
- Configuration and interfaces
- Quotation
















