IP-01 · Local source sharing
Typical local distribution: two source encoders and four display decoders on one managed switch.
Signal flow
All 4 connections · 5 devices and services
Choose a connection to read its endpoints, direction and interface. Repeated device IDs refer to the same equipment across views.
From · SA2 HDMI sources
To · EA2 encoders - fixed TX
Direction: source → destination · 2 HDMI with audio
From · EA2 encoders - fixed TX
To · WA1 access switch A 6 endpoint ports PSE at least 225 W
Direction: source → destination · 2 x 1G + PoE+
From · WA1 access switch A 6 endpoint ports PSE at least 225 W
To · DA4 decoders - fixed RX
Direction: source → destination · 4 x 1G + PoE+
From · DA4 decoders - fixed RX
To · VA4 displays
Direction: source → destination · 4 HDMI with audio
SA · 2 HDMI sources
Connections: L01. Repeated device IDs refer to the same equipment.
EA · 2 encoders - fixed TX
Connections: L01, L02. Repeated device IDs refer to the same equipment.
WA · 1 access switch A 6 endpoint ports PSE at least 225 W
Connections: L02, L03. Repeated device IDs refer to the same equipment.
DA · 4 decoders - fixed RX
Connections: L03, L04. Repeated device IDs refer to the same equipment.
VA · 4 displays
Connections: L04. Repeated device IDs refer to the same equipment.
Devices, connections & design conditions 4 connections
- Typical local distribution: two source encoders and four display decoders on one managed switch.
- Two HDMI sources feed two encoders, one switch and four decoders connected to four displays; the operator client and controller exchange commands and status.
- SA
- 2 HDMI sources
- EA
- 2 encoders - fixed TX
- WA
- 1 access switch A 6 endpoint ports PSE at least 225 W
- DA
- 4 decoders - fixed RX
- VA
- 4 displays
- SA → EA2 HDMI with audio
- EA → WA2 x 1G + PoE+
- WA → DA4 x 1G + PoE+
- DA → VA4 HDMI with audio
BASE: one L2 AV VLAN; management VLAN separate Dashed control shares the physical Ethernet links One selected primary video feed per decoder USB, multiview, independent AoIP and streaming excluded
Control & status
All 8 connections · 7 devices and services
Choose a connection to read its endpoints, direction and interface. Repeated device IDs refer to the same equipment across views.
From · DA4 decoders - fixed RX
To · WA1 access switch A 6 endpoint ports PSE at least 225 W
Direction: source → destination · IGMP membership + status
From · UA1 wired operator client Local power
To · WA1 access switch A 6 endpoint ports PSE at least 225 W
Direction: source → destination · 1G wired access
From · CTRL1 route controller Local power; programmed UI + drivers
To · WA1 access switch A 6 endpoint ports PSE at least 225 W
Direction: source → destination · commands via switch
From · WA1 access switch A 6 endpoint ports PSE at least 225 W
To · CTRL1 route controller Local power; programmed UI + drivers
Direction: source → destination · endpoint status via switch
From · GW1 client IT gateway interface AV + management VLAN trunk
To · WA1 access switch A 6 endpoint ports PSE at least 225 W
Direction: source → destination · allowed unicast services
From · ITClient IT services and administration No media routing to corporate network
To · GW1 client IT gateway interface AV + management VLAN trunk
Bidirectional · firewall policy
From · WA1 access switch A 6 endpoint ports PSE at least 225 W
To · DA4 decoders - fixed RX
Direction: source → destination · route commands
From · EA2 encoders - fixed TX
To · WA1 access switch A 6 endpoint ports PSE at least 225 W
Direction: source → destination · source status
EA · 2 encoders - fixed TX
Connections: L12. Repeated device IDs refer to the same equipment.
WA · 1 access switch A 6 endpoint ports PSE at least 225 W
Connections: L05, L06, L07, L08, L09, L11, L12. Repeated device IDs refer to the same equipment.
DA · 4 decoders - fixed RX
Connections: L05, L11. Repeated device IDs refer to the same equipment.
UA · 1 wired operator client Local power
Connections: L06. Repeated device IDs refer to the same equipment.
CTRL · 1 route controller Local power; programmed UI + drivers
Connections: L07, L08. Repeated device IDs refer to the same equipment.
GW · 1 client IT gateway interface AV + management VLAN trunk
Connections: L09, L10. Repeated device IDs refer to the same equipment.
IT · Client IT services and administration No media routing to corporate network
Connections: L10. Repeated device IDs refer to the same equipment.
Devices, connections & design conditions 8 connections
- Typical local distribution: two source encoders and four display decoders on one managed switch.
- Two HDMI sources feed two encoders, one switch and four decoders connected to four displays; the operator client and controller exchange commands and status.
- EA
- 2 encoders - fixed TX
- WA
- 1 access switch A 6 endpoint ports PSE at least 225 W
- DA
- 4 decoders - fixed RX
- UA
- 1 wired operator client Local power
- CTRL
- 1 route controller Local power; programmed UI + drivers
- GW
- 1 client IT gateway interface AV + management VLAN trunk
- IT
- Client IT services and administration No media routing to corporate network
- DA → WAIGMP membership + status
- UA → WA1G wired access
- CTRL → WAcommands via switch
- WA → CTRLendpoint status via switch
- GW → WAallowed unicast services
- IT ↔ GWfirewall policy
- WA → DAroute commands
- EA → WAsource status
BASE: one L2 AV VLAN; management VLAN separate Dashed control shares the physical Ethernet links One selected primary video feed per decoder USB, multiview, independent AoIP and streaming excluded
Typical architecture · not a project drawing