EV-02 · Stage with live camera relay
House and recording audio use separate mixes. Two cameras and content feed the HD switcher, LED, programme recording and stream.
AUDIO
All 11 connections · 12 devices and services
Choose a connection to read its endpoints, direction and interface. Repeated device IDs refer to the same equipment across views.
From · EV02_MIC16 x wired microphones
To · IOINStage source patch
Direction: source → destination · See source and destination requirements.
From · EV02_DI4 x DI channels
To · IOINStage source patch
Direction: source → destination · See source and destination requirements.
From · EV02_RF4 x complete wireless channels
To · IOINStage source patch
Direction: source → destination · See source and destination requirements.
From · IOINStage source patch
To · EV02_IO1 x stagebox 32 inputs / 16 line outputs
Direction: source → destination · 24 analogue channels
From · EV02_IO1 x stagebox 32 inputs / 16 line outputs
To · EV02_MIX1 x FOH console 32 input channels + 2 local line outs
Bidirectional · matched digital link 24 inputs / 6 returns
From · EV02_IO1 x stagebox 32 inputs / 16 line outputs
To · EV02_PA1 x designed PA assembly DSP, amplification, main/fill/sub
Direction: source → destination · out 1-2: L/R
From · EV02_IO1 x stagebox 32 inputs / 16 line outputs
To · EV02_MON4 x powered stage monitors
Direction: source → destination · out 3-6: four aux mixes
From · PCREFSame content laptop
To · EV02_USB1 x stereo USB audio interface
Direction: source → destination · USB audio
From · EV02_USB1 x stereo USB audio interface
To · EV02_MIX1 x FOH console 32 input channels + 2 local line outs
Direction: source → destination · 2 balanced local inputs
From · EV02_MIX1 x FOH console 32 input channels + 2 local line outs
To · EV02_LEVEL1 x stereo level-matching interface isolation / attenuation / correct TRS wiring
Direction: source → destination · programme L/R; 2 local outs
From · EV02_LEVEL1 x stereo level-matching interface isolation / attenuation / correct TRS wiring
To · AVREFSame HD switcher analogue input 1, line mode
Direction: source → destination · unbalanced stereo, peak checked
EV02_MIC · 16 x wired microphones
Connections: L01. Repeated device IDs refer to the same equipment.
IOIN · Stage source patch
Connections: L01, L02, L03, L04. Repeated device IDs refer to the same equipment.
EV02_DI · 4 x DI channels
Connections: L02. Repeated device IDs refer to the same equipment.
EV02_RF · 4 x complete wireless channels
Connections: L03. Repeated device IDs refer to the same equipment.
EV02_IO · 1 x stagebox 32 inputs / 16 line outputs
Connections: L04, L05, L06, L07. Repeated device IDs refer to the same equipment.
EV02_MIX · 1 x FOH console 32 input channels + 2 local line outs
Connections: L05, L09, L10. Repeated device IDs refer to the same equipment.
EV02_PA · 1 x designed PA assembly DSP, amplification, main/fill/sub
Connections: L06. Repeated device IDs refer to the same equipment.
EV02_MON · 4 x powered stage monitors
Connections: L07. Repeated device IDs refer to the same equipment.
PCREF · Same content laptop
Connections: L08. Repeated device IDs refer to the same equipment.
EV02_USB · 1 x stereo USB audio interface
Connections: L08, L09. Repeated device IDs refer to the same equipment.
EV02_LEVEL · 1 x stereo level-matching interface isolation / attenuation / correct TRS wiring
Connections: L10, L11. Repeated device IDs refer to the same equipment.
AVREF · Same HD switcher analogue input 1, line mode
Connections: L11. Repeated device IDs refer to the same equipment.
Devices, connections & design conditions 11 connections
- House and recording audio use separate mixes. Two cameras and content feed the HD switcher, LED, programme recording and stream.
- EV-02 reference diagram with three SDI sources, audio level matching, direct LED relay, multiview monitoring and separate camera control.
- EV02_MIC
- 16 x wired microphones
- IOIN
- Stage source patch
- EV02_DI
- 4 x DI channels
- EV02_RF
- 4 x complete wireless channels
- EV02_IO
- 1 x stagebox 32 inputs / 16 line outputs
- EV02_MIX
- 1 x FOH console 32 input channels + 2 local line outs
- EV02_PA
- 1 x designed PA assembly DSP, amplification, main/fill/sub
- EV02_MON
- 4 x powered stage monitors
- PCREF
- Same content laptop
- EV02_USB
- 1 x stereo USB audio interface
- EV02_LEVEL
- 1 x stereo level-matching interface isolation / attenuation / correct TRS wiring
- AVREF
- Same HD switcher analogue input 1, line mode
- EV02_MIC → IOIN
- EV02_DI → IOIN
- EV02_RF → IOIN
- IOIN → EV02_IO24 analogue channels
- EV02_IO ↔ EV02_MIXmatched digital link 24 inputs / 6 returns
- EV02_IO → EV02_PAout 1-2: L/R
- EV02_IO → EV02_MONout 3-6: four aux mixes
- PCREF → EV02_USBUSB audio
- EV02_USB → EV02_MIX2 balanced local inputs
- EV02_MIX → EV02_LEVELprogramme L/R; 2 local outs
- EV02_LEVEL → AVREFunbalanced stereo, peak checked
VIDEO
All 9 connections · 10 devices and services
Choose a connection to read its endpoints, direction and interface. Repeated device IDs refer to the same equipment across views.
From · EV02_CAM2 x indoor SDI cameras
To · EV02_VIDEO1 x HD SDI switcher 8 inputs / 4 SDI outputs
Direction: source → destination · 3G-SDI inputs 1-2
From · EV02_PC1 x content laptop customer supplied
To · EV02_CONV1 x HDMI to SDI converter
Direction: source → destination · HDMI
From · EV02_CONV1 x HDMI to SDI converter
To · EV02_VIDEO1 x HD SDI switcher 8 inputs / 4 SDI outputs
Direction: source → destination · SDI input 3; embedded audio off
From · EV02_VIDEO1 x HD SDI switcher 8 inputs / 4 SDI outputs
To · EV02_LEDPROC1 x LED processor 3G-SDI input
Direction: source → destination · SDI out 1: programme
From · EV02_LEDPROC1 x LED processor 3G-SDI input
To · EV02_LED1 x indoor LED assembly
Direction: source → destination · matched LED data
From · EV02_VIDEO1 x HD SDI switcher 8 inputs / 4 SDI outputs
To · EV02_MV1 x source monitor direct SDI input
Direction: source → destination · SDI out 2: multiview
From · EV02_VIDEO1 x HD SDI switcher 8 inputs / 4 SDI outputs
To · EV02_SSD1 x recording drive validation required
Direction: source → destination · USB programme recording
From · EV02_VIDEO1 x HD SDI switcher 8 inputs / 4 SDI outputs
To · EV02_WAN1 x customer WAN and streaming service
Direction: source → destination · stream via control LAN
From · EV02_WAN1 x customer WAN and streaming service
To · VIEWERAuthorised external test viewer
Direction: source → destination · external playback check
EV02_CAM · 2 x indoor SDI cameras
Connections: L12. Repeated device IDs refer to the same equipment.
EV02_VIDEO · 1 x HD SDI switcher 8 inputs / 4 SDI outputs
Connections: L12, L14, L15, L17, L18, L19. Repeated device IDs refer to the same equipment.
EV02_PC · 1 x content laptop customer supplied
Connections: L13. Repeated device IDs refer to the same equipment.
EV02_CONV · 1 x HDMI to SDI converter
Connections: L13, L14. Repeated device IDs refer to the same equipment.
EV02_LEDPROC · 1 x LED processor 3G-SDI input
Connections: L15, L16. Repeated device IDs refer to the same equipment.
EV02_LED · 1 x indoor LED assembly
Connections: L16. Repeated device IDs refer to the same equipment.
EV02_MV · 1 x source monitor direct SDI input
Connections: L17. Repeated device IDs refer to the same equipment.
EV02_SSD · 1 x recording drive validation required
Connections: L18. Repeated device IDs refer to the same equipment.
EV02_WAN · 1 x customer WAN and streaming service
Connections: L19, L20. Repeated device IDs refer to the same equipment.
VIEWER · Authorised external test viewer
Connections: L20. Repeated device IDs refer to the same equipment.
Devices, connections & design conditions 9 connections
- House and recording audio use separate mixes. Two cameras and content feed the HD switcher, LED, programme recording and stream.
- EV-02 reference diagram with three SDI sources, audio level matching, direct LED relay, multiview monitoring and separate camera control.
- EV02_CAM
- 2 x indoor SDI cameras
- EV02_VIDEO
- 1 x HD SDI switcher 8 inputs / 4 SDI outputs
- EV02_PC
- 1 x content laptop customer supplied
- EV02_CONV
- 1 x HDMI to SDI converter
- EV02_LEDPROC
- 1 x LED processor 3G-SDI input
- EV02_LED
- 1 x indoor LED assembly
- EV02_MV
- 1 x source monitor direct SDI input
- EV02_SSD
- 1 x recording drive validation required
- EV02_WAN
- 1 x customer WAN and streaming service
- VIEWER
- Authorised external test viewer
- EV02_CAM → EV02_VIDEO3G-SDI inputs 1-2
- EV02_PC → EV02_CONVHDMI
- EV02_CONV → EV02_VIDEOSDI input 3; embedded audio off
- EV02_VIDEO → EV02_LEDPROCSDI out 1: programme
- EV02_LEDPROC → EV02_LEDmatched LED data
- EV02_VIDEO → EV02_MVSDI out 2: multiview
- EV02_VIDEO → EV02_SSDUSB programme recording
- EV02_VIDEO → EV02_WANstream via control LAN
- EV02_WAN → VIEWERexternal playback check
CONTROL
All 5 connections · 6 devices and services
Choose a connection to read its endpoints, direction and interface. Repeated device IDs refer to the same equipment across views.
From · EV02_OPS1 x control workstation local monitor included
To · EV02_NET1 x managed control switch 8 of 16 copper ports used
Bidirectional · commands / status
From · EV02_PTZ1 x camera controller
To · EV02_NET1 x managed control switch 8 of 16 copper ports used
Bidirectional · IP commands / status
From · EV02_NET1 x managed control switch 8 of 16 copper ports used
To · CAMREFSame two cameras separate power; no assumed PoE
Bidirectional · IP presets / feedback
From · EV02_NET1 x managed control switch 8 of 16 copper ports used
To · DEVREFSame switcher and LED processor
Bidirectional · control / record / fault state
From · EV02_NET1 x managed control switch 8 of 16 copper ports used
To · PCWANSame content PC and WAN router
Direction: source → destination · LAN / permitted WAN access
EV02_OPS · 1 x control workstation local monitor included
Connections: L21. Repeated device IDs refer to the same equipment.
EV02_NET · 1 x managed control switch 8 of 16 copper ports used
Connections: L21, L22, L23, L24, L25. Repeated device IDs refer to the same equipment.
EV02_PTZ · 1 x camera controller
Connections: L22. Repeated device IDs refer to the same equipment.
CAMREF · Same two cameras separate power; no assumed PoE
Connections: L23. Repeated device IDs refer to the same equipment.
DEVREF · Same switcher and LED processor
Connections: L24. Repeated device IDs refer to the same equipment.
PCWAN · Same content PC and WAN router
Connections: L25. Repeated device IDs refer to the same equipment.
Devices, connections & design conditions 5 connections
- House and recording audio use separate mixes. Two cameras and content feed the HD switcher, LED, programme recording and stream.
- EV-02 reference diagram with three SDI sources, audio level matching, direct LED relay, multiview monitoring and separate camera control.
- EV02_OPS
- 1 x control workstation local monitor included
- EV02_NET
- 1 x managed control switch 8 of 16 copper ports used
- EV02_PTZ
- 1 x camera controller
- CAMREF
- Same two cameras separate power; no assumed PoE
- DEVREF
- Same switcher and LED processor
- PCWAN
- Same content PC and WAN router
- EV02_OPS ↔ EV02_NETcommands / status
- EV02_PTZ ↔ EV02_NETIP commands / status
- EV02_NET ↔ CAMREFIP presets / feedback
- EV02_NET ↔ DEVREFcontrol / record / fault state
- EV02_NET → PCWANLAN / permitted WAN access
LIGHTING
All 4 connections · 5 devices and services
Choose a connection to read its endpoints, direction and interface. Repeated device IDs refer to the same equipment across views.
From · EV02_LC1 x lighting console
To · EV02_SPLIT1 x isolated splitter 8 outputs, same universe
Direction: source → destination · DMX U1
From · EV02_SPLIT1 x isolated splitter 8 outputs, same universe
To · EV02_LIGHT8 x profile fixtures optics and mounting included
Direction: source → destination · 8 separate DMX branches
From · EV02_LIGHT8 x profile fixtures optics and mounting included
To · EV02_TERM8 x 120 ohm terminators
Connection · branch ends
From · EV02_LIGHT8 x profile fixtures optics and mounting included
To · TECHVenue technician
Direction: source → destination · operator visual check
EV02_LC · 1 x lighting console
Connections: L26. Repeated device IDs refer to the same equipment.
EV02_SPLIT · 1 x isolated splitter 8 outputs, same universe
Connections: L26, L27. Repeated device IDs refer to the same equipment.
EV02_LIGHT · 8 x profile fixtures optics and mounting included
Connections: L27, L28, L29. Repeated device IDs refer to the same equipment.
EV02_TERM · 8 x 120 ohm terminators
Connections: L28. Repeated device IDs refer to the same equipment.
TECH · Venue technician
Connections: L29. Repeated device IDs refer to the same equipment.
Devices, connections & design conditions 4 connections
- House and recording audio use separate mixes. Two cameras and content feed the HD switcher, LED, programme recording and stream.
- EV-02 reference diagram with three SDI sources, audio level matching, direct LED relay, multiview monitoring and separate camera control.
- EV02_LC
- 1 x lighting console
- EV02_SPLIT
- 1 x isolated splitter 8 outputs, same universe
- EV02_LIGHT
- 8 x profile fixtures optics and mounting included
- EV02_TERM
- 8 x 120 ohm terminators
- TECH
- Venue technician
- EV02_LC → EV02_SPLITDMX U1
- EV02_SPLIT → EV02_LIGHT8 separate DMX branches
- EV02_LIGHT — EV02_TERMbranch ends
- EV02_LIGHT → TECHoperator visual check
ALLOWANCES
All 6 connections · 9 devices and services
Choose a connection to read its endpoints, direction and interface. Repeated device IDs refer to the same equipment across views.
From · EV02_INFRA1 x installation allowance feeds, supports, cables and power supplies
To · POWERREFSame PA, LED and lighting systems
Direction: source → destination · separately sized AC circuits
From · EV02_INFRA1 x installation allowance feeds, supports, cables and power supplies
To · LIMITPA / LED quantities and loads by project
Connection · See source and destination requirements.
From · EV02_UPS1 x control-rack UPS load and runtime by design
To · UPSREFSame control and recording rack selected loads only
Direction: source → destination · protected control power
From · EV02_SPARES1 x service spares schedule
To · LIMITPA / LED quantities and loads by project
Connection · See source and destination requirements.
From · EV02_ISO1 x optional ISO workflow resize and validate the recording drive
To · OPTIONSOptional: extra design and testing
Connection · See source and destination requirements.
From · EV02_FX4 x optional effects fixtures add DMX distribution and power
To · OPTIONSOptional: extra design and testing
Connection · See source and destination requirements.
EV02_INFRA · 1 x installation allowance feeds, supports, cables and power supplies
Connections: L30, L31. Repeated device IDs refer to the same equipment.
POWERREF · Same PA, LED and lighting systems
Connections: L30. Repeated device IDs refer to the same equipment.
LIMIT · PA / LED quantities and loads by project
Connections: L31, L33. Repeated device IDs refer to the same equipment.
EV02_UPS · 1 x control-rack UPS load and runtime by design
Connections: L32. Repeated device IDs refer to the same equipment.
UPSREF · Same control and recording rack selected loads only
Connections: L32. Repeated device IDs refer to the same equipment.
EV02_SPARES · 1 x service spares schedule
Connections: L33. Repeated device IDs refer to the same equipment.
EV02_ISO · 1 x optional ISO workflow resize and validate the recording drive
Connections: L34. Repeated device IDs refer to the same equipment.
OPTIONS · Optional: extra design and testing
Connections: L34, L35. Repeated device IDs refer to the same equipment.
EV02_FX · 4 x optional effects fixtures add DMX distribution and power
Connections: L35. Repeated device IDs refer to the same equipment.
Devices, connections & design conditions 6 connections
- House and recording audio use separate mixes. Two cameras and content feed the HD switcher, LED, programme recording and stream.
- EV-02 reference diagram with three SDI sources, audio level matching, direct LED relay, multiview monitoring and separate camera control.
- EV02_INFRA
- 1 x installation allowance feeds, supports, cables and power supplies
- POWERREF
- Same PA, LED and lighting systems
- LIMIT
- PA / LED quantities and loads by project
- EV02_UPS
- 1 x control-rack UPS load and runtime by design
- UPSREF
- Same control and recording rack selected loads only
- EV02_SPARES
- 1 x service spares schedule
- EV02_ISO
- 1 x optional ISO workflow resize and validate the recording drive
- OPTIONS
- Optional: extra design and testing
- EV02_FX
- 4 x optional effects fixtures add DMX distribution and power
- EV02_INFRA → POWERREFseparately sized AC circuits
- EV02_INFRA — LIMIT
- EV02_UPS → UPSREFprotected control power
- EV02_SPARES — LIMIT
- EV02_ISO — OPTIONS
- EV02_FX — OPTIONS
Typical architecture · not a project drawing