CR-01 · Shared operational overview
Keep four agreed sources visible while two operators work locally.
Signal flow
All 4 connections · 4 devices and services
Choose a connection to read its endpoints, direction and interface. Repeated device IDs refer to the same equipment across views.
From · SRC4 x source PCs S1 and S2 are the local operator PCs
To · PROC1 x wall compositor 4 capture channels / 4 panel outputs
Direction: source → destination · 4 HDMI feeds; 1080p60 assumed
From · PROC1 x wall compositor 4 capture channels / 4 panel outputs
To · WALL4 x LCD panels 2 by 2; FHD per panel assumed
Direction: source → destination · 4 separate panel feeds
From · SRC4 x source PCs S1 and S2 are the local operator PCs
To · DESK2 x local operator sets monitor + keyboard + mouse; no extra PCs
Direction: source → destination · 2 additional local display outputs
From · DESK2 x local operator sets monitor + keyboard + mouse; no extra PCs
To · SRC4 x source PCs S1 and S2 are the local operator PCs
Direction: source → destination · local keyboard and mouse USB
SRC · 4 x source PCs S1 and S2 are the local operator PCs
Connections: L01, L03, L04. Repeated device IDs refer to the same equipment.
PROC · 1 x wall compositor 4 capture channels / 4 panel outputs
Connections: L01, L02. Repeated device IDs refer to the same equipment.
WALL · 4 x LCD panels 2 by 2; FHD per panel assumed
Connections: L02. Repeated device IDs refer to the same equipment.
DESK · 2 x local operator sets monitor + keyboard + mouse; no extra PCs
Connections: L03, L04. Repeated device IDs refer to the same equipment.
Devices, connections & design conditions 4 connections
- Four HDMI sources feed four capture channels.
- Four separate outputs drive the LCD panels.
- Two local desks use two of those source PCs; layout control is separate.
- SRC
- 4 x source PCs S1 and S2 are the local operator PCs
- PROC
- 1 x wall compositor 4 capture channels / 4 panel outputs
- WALL
- 4 x LCD panels 2 by 2; FHD per panel assumed
- DESK
- 2 x local operator sets monitor + keyboard + mouse; no extra PCs
- SRC → PROC4 HDMI feeds; 1080p60 assumed
- PROC → WALL4 separate panel feeds
- SRC → DESK2 additional local display outputs
- DESK → SRClocal keyboard and mouse USB
Reference design, not a site plan. Rack, 2 PDU, wall mount and cable/PSU sets: separate BOQ lines. UPS does not duplicate the compositor. No switched KVM.
Control & status
All 4 connections · 5 devices and services
Choose a connection to read its endpoints, direction and interface. Repeated device IDs refer to the same equipment across views.
From · PANEL1 x layout panel authorised scene user
To · NET1 x management switch 16 ports; 7 used + 1 service
Bidirectional · IP: commands / active state
From · NET1 x management switch 16 ports; 7 used + 1 service
To · PROC1 x wall compositor 4 capture channels / 4 panel outputs
Bidirectional · IP: presets / input loss / display status
From · NET1 x management switch 16 ports; 7 used + 1 service
To · WALL4 x LCD panels 2 by 2; FHD per panel assumed
Bidirectional · IP: panel control and status
From · UPS1 x UPS system source, desk, control and wall loads sized separately
To · NET1 x management switch 16 ports; 7 used + 1 service
Direction: source → destination · power status; mains circuits omitted
PROC · 1 x wall compositor 4 capture channels / 4 panel outputs
Connections: L06. Repeated device IDs refer to the same equipment.
WALL · 4 x LCD panels 2 by 2; FHD per panel assumed
Connections: L07. Repeated device IDs refer to the same equipment.
PANEL · 1 x layout panel authorised scene user
Connections: L05. Repeated device IDs refer to the same equipment.
NET · 1 x management switch 16 ports; 7 used + 1 service
Connections: L05, L06, L07, L08. Repeated device IDs refer to the same equipment.
UPS · 1 x UPS system source, desk, control and wall loads sized separately
Connections: L08. Repeated device IDs refer to the same equipment.
Devices, connections & design conditions 4 connections
- Four HDMI sources feed four capture channels.
- Four separate outputs drive the LCD panels.
- Two local desks use two of those source PCs; layout control is separate.
- PROC
- 1 x wall compositor 4 capture channels / 4 panel outputs
- WALL
- 4 x LCD panels 2 by 2; FHD per panel assumed
- PANEL
- 1 x layout panel authorised scene user
- NET
- 1 x management switch 16 ports; 7 used + 1 service
- UPS
- 1 x UPS system source, desk, control and wall loads sized separately
- PANEL ↔ NETIP: commands / active state
- NET ↔ PROCIP: presets / input loss / display status
- NET ↔ WALLIP: panel control and status
- UPS → NETpower status; mains circuits omitted
Reference design, not a site plan. Rack, 2 PDU, wall mount and cable/PSU sets: separate BOQ lines. UPS does not duplicate the compositor. No switched KVM.
Typical architecture · not a project drawing