MR-02 · Dedicated room PC
An SDI camera reaches the PC through USB capture. The ceiling array sends processed speech; playback feeds two speakers and the array's echo reference.
Signal flow
All 9 connections · 8 devices and services
Choose a connection to read its endpoints, direction and interface. Repeated device IDs refer to the same equipment across views.
From · CAM1 SDI PTZ camera Separate 12 V supply
To · CAP1 SDI-to-USB capture Host powered; embedded audio off
Direction: source → destination · 3G-SDI; BNC / capture adapter
From · CAP1 SDI-to-USB capture Host powered; embedded audio off
To · PC1 dedicated room PC Call UI, sharing and PTZ utility
Direction: source → destination · USB 3 video; 1080p30 target
From · PC1 dedicated room PC Call UI, sharing and PTZ utility
To · DIS1 display 75-inch candidate; speakers off
Direction: source → destination · HDMI
From · PC1 dedicated room PC Call UI, sharing and PTZ utility
To · REMRemote participants / service
Bidirectional · IP call; content shared in application
From · MIC1 ceiling microphone array AEC ON; automatic coverage ON
To · DSP1 USB audio processor Input 9 to USB send; no second AEC
Direction: source → destination · Dante: 1 processed automix
From · DSP1 USB audio processor Input 9 to USB send; no second AEC
To · SPK2 powered network speakers Same mono playback bus
Direction: source → destination · Dante TX1: playback
From · DSP1 USB audio processor Input 9 to USB send; no second AEC
To · MIC1 ceiling microphone array AEC ON; automatic coverage ON
Direction: source → destination · Dante TX2: playback to AEC reference
From · DSP1 USB audio processor Input 9 to USB send; no second AEC
To · PC1 dedicated room PC Call UI, sharing and PTZ utility
Direction: source → destination · USB send: local speech only
From · PC1 dedicated room PC Call UI, sharing and PTZ utility
To · DSP1 USB audio processor Input 9 to USB send; no second AEC
Direction: source → destination · USB playback: far end + content
CAM · 1 SDI PTZ camera Separate 12 V supply
Connections: L01. Repeated device IDs refer to the same equipment.
CAP · 1 SDI-to-USB capture Host powered; embedded audio off
Connections: L01, L02. Repeated device IDs refer to the same equipment.
PC · 1 dedicated room PC Call UI, sharing and PTZ utility
Connections: L02, L03, L04, L08, L09. Repeated device IDs refer to the same equipment.
DIS · 1 display 75-inch candidate; speakers off
Connections: L03. Repeated device IDs refer to the same equipment.
REM · Remote participants / service
Connections: L04. Repeated device IDs refer to the same equipment.
MIC · 1 ceiling microphone array AEC ON; automatic coverage ON
Connections: L05, L07. Repeated device IDs refer to the same equipment.
DSP · 1 USB audio processor Input 9 to USB send; no second AEC
Connections: L05, L06, L07, L08, L09. Repeated device IDs refer to the same equipment.
SPK · 2 powered network speakers Same mono playback bus
Connections: L06. Repeated device IDs refer to the same equipment.
Devices, connections & design conditions 9 connections
- An SDI camera reaches the PC through USB capture. The ceiling array sends processed speech; playback feeds two speakers and the array's echo reference.
- MR-02 reference diagram showing SDI-to-USB capture, microphone AEC, USB audio, Dante routes, PoE and PC controls.
- CAM
- 1 SDI PTZ camera Separate 12 V supply
- CAP
- 1 SDI-to-USB capture Host powered; embedded audio off
- PC
- 1 dedicated room PC Call UI, sharing and PTZ utility
- DIS
- 1 display 75-inch candidate; speakers off
- REM
- Remote participants / service
- MIC
- 1 ceiling microphone array AEC ON; automatic coverage ON
- DSP
- 1 USB audio processor Input 9 to USB send; no second AEC
- SPK
- 2 powered network speakers Same mono playback bus
- CAM → CAP3G-SDI; BNC / capture adapter
- CAP → PCUSB 3 video; 1080p30 target
- PC → DISHDMI
- PC ↔ REMIP call; content shared in application
- MIC → DSPDante: 1 processed automix
- DSP → SPKDante TX1: playback
- DSP → MICDante TX2: playback to AEC reference
- DSP → PCUSB send: local speech only
- PC → DSPUSB playback: far end + content
USB playback is excluded from USB microphone send. No local voice lift, guest takeover or room panel in the baseline. Reference design: no system tests performed.
Control & power
All 3 connections · 5 devices and services
Choose a connection to read its endpoints, direction and interface. Repeated device IDs refer to the same equipment across views.
From · PC1 dedicated room PC Call UI, sharing and PTZ utility
To · CAM1 SDI PTZ camera Separate 12 V supply
Direction: source → destination · VISCA/IP presets; verified utility
From · PC1 dedicated room PC Call UI, sharing and PTZ utility
To · DIS1 display 75-inch candidate; speakers off
Direction: source → destination · Agreed display IP control / status
From · SW1 managed room switch 8 copper links used; require at least 10 4 PoE devices; PSE at least 150 W
To · NWPhysical port schedule 1 array + 1 processor + 2 speakers: Ethernet and PoE PC + camera + display + uplink: Ethernet only
Direction: source → destination · Physical connections; see port schedule
CAM · 1 SDI PTZ camera Separate 12 V supply
Connections: L10. Repeated device IDs refer to the same equipment.
PC · 1 dedicated room PC Call UI, sharing and PTZ utility
Connections: L10, L11. Repeated device IDs refer to the same equipment.
DIS · 1 display 75-inch candidate; speakers off
Connections: L11. Repeated device IDs refer to the same equipment.
SW · 1 managed room switch 8 copper links used; require at least 10 4 PoE devices; PSE at least 150 W
Connections: L12. Repeated device IDs refer to the same equipment.
NW · Physical port schedule 1 array + 1 processor + 2 speakers: Ethernet and PoE PC + camera + display + uplink: Ethernet only
Connections: L12. Repeated device IDs refer to the same equipment.
Devices, connections & design conditions 3 connections
- An SDI camera reaches the PC through USB capture. The ceiling array sends processed speech; playback feeds two speakers and the array's echo reference.
- MR-02 reference diagram showing SDI-to-USB capture, microphone AEC, USB audio, Dante routes, PoE and PC controls.
- CAM
- 1 SDI PTZ camera Separate 12 V supply
- PC
- 1 dedicated room PC Call UI, sharing and PTZ utility
- DIS
- 1 display 75-inch candidate; speakers off
- SW
- 1 managed room switch 8 copper links used; require at least 10 4 PoE devices; PSE at least 150 W
- NW
- Physical port schedule 1 array + 1 processor + 2 speakers: Ethernet and PoE PC + camera + display + uplink: Ethernet only
- PC → CAMVISCA/IP presets; verified utility
- PC → DISAgreed display IP control / status
- SW → NWPhysical connections; see port schedule
USB playback is excluded from USB microphone send. No local voice lift, guest takeover or room panel in the baseline. Reference design: no system tests performed.
Typical architecture · not a project drawing