AV Access · AV over IP

1080P AV over IP receiver with IR control

ModelHDIP120RX

Extend and Split with Ease: Works with an HDIP120E transmitter (TX) to extend 1080P@60hz full HD HDMI signal up to 120m/394ft. Up to 10 sets of HDIP120D receiver (RX) can work with a TX to build an extender splitter combo.

PriceOn request

Prices on request. We confirm the configuration, availability and lead time for each project; quotations exclude installation, programming, freight and VAT unless agreed otherwise.

01SpecificationManufacturer's data · 7 groups · 28 values

What this product is, in numbers.

PDFUser Manual6 pages · 621 KB

The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.

01General5
Product type
4KIP200E/D: Transmitter & Receiver / 4KIP204E: Transmitter / HDIP100E/D: Transmitter & Receiver / HDIP120E/D: Transmitter & Receiver / 4KIP100-KVM: Transmitter & Receiver
Type of switch required
4KIP200E/D: 100M (1G recommended) / 4KIP204E: 100M (1G recommended) / HDIP100E/D: 100M (1G recommended) / HDIP120E/D: 100M (1G recommended) / 4KIP100-KVM: 1G
Connection mode
4KIP200E/D: One to one, one to many, many to many / 4KIP204E: One to one, one to many, many to many (works with 4KIP200D) / HDIP100E/D: One to one, one to many, many to many / HDIP120E/D: One to one, one to many / 4KIP100-KVM: (Multiple) one to one
KVM extension
4KIP200E/D: No / 4KIP204E: No / HDIP100E/D: No / HDIP120E/D: No / 4KIP100-KVM: Yes
Compliance
HDMI 1.3, HDCP 1.4
02Video8
Supported video resolution
4KIP200E/D: Up to 4K@30hz / 4KIP204E: Up to 4K@30hz / HDIP100E/D: Up to 1080P@60 Hz / HDIP120E/D: Up to 1080P@60 Hz / 4KIP100-KVM: Up to 4K@30hz; 1080P@120hz
HDMI
4KIP200E/D: 1.4 / 4KIP204E: 1.4 / HDIP100E/D: 1.3 / HDIP120E/D: 1.3 / 4KIP100-KVM: 1.4
HDCP
4KIP200E/D: 2.2 / 4KIP204E: 2.2 / HDIP100E/D: 1.4 / HDIP120E/D: 1.4 / 4KIP100-KVM: 1.4
One-to-One transmission range
4KIP200E/D: Transmits 4K@30hz HDMI signal up to 120 m / 394 ft / 4KIP204E: Transmits 4K@30hz HDMI signal up to 120 m / 394 ft / HDIP100E/D: Transmits 1080P@60hz HDMI signal up to 120 m / 394 ft / HDIP120E/D: Transmits 1080P@60hz HDMI signal up to 120 m / 394 ft / 4KIP100-KVM: Transmits 4K@30hz HDMI signal up to 120 m / 394 ft
Video wall
4KIP200E/D: Yes, up to 8 × 8 / 4KIP204E: Yes, up to 8 × 8 (need to work with 4KIP200D) / HDIP100E/D: Yes, up to 8 × 8 / HDIP120E/D: No / 4KIP100-KVM: No
Input resolutions
Up to 1080P@60 Hz
Output resolutions
Up to 1080P@60 Hz
Transmission distance
120 m / 394 ft
03Audio1
Audio channel
4KIP200E/D: Stereo / 4KIP204E: Stereo / HDIP100E/D: Stereo / HDIP120E/D: Stereo / 4KIP100-KVM: 7.1 Channel
04Control and interfaces6
HDMI interface
4KIP200E/D: Transmitter: 1x HDMI in / Receiver: 1x HDMI out / 4KIP204E: 4x HDMI in / HDIP100E/D: Transmitter: 1x HDMI in / Receiver: 1x HDMI out / HDIP120E/D: Transmitter: 1x HDMI in / Receiver: 1x HDMI out / 4KIP100-KVM: Transmitter: 1x HDMI in / Receiver: 1x HDMI out
IR control
4KIP200E/D: No / 4KIP204E: No / HDIP100E/D: No / HDIP120E/D: Yes / 4KIP100-KVM: No
RS232
4KIP200E/D: Yes / 4KIP204E: No / HDIP100E/D: Yes / HDIP120E/D: No / 4KIP100-KVM: No
Visual control on app
4KIP200E/D: Yes / 4KIP204E: Yes / HDIP100E/D: Yes / HDIP120E/D: No / 4KIP100-KVM: No
Input A/V port
1 x LAN
Output A/V port
1 x HDMI
05Power3
PoE
4KIP200E/D: Yes / 4KIP204E: No / HDIP100E/D: Yes / HDIP120E/D: No / 4KIP100-KVM: No
Power supply
DC 5 V 1 A
Power consumption
1.6 W (Max)
06Physical2
Product dimension (W × H × D)
140 × 21 × 80 mm / 5.5 × 0.83 × 3.15 in / each for TX and RX (Antennas not included)
Net weight
0.29 kg
07Environment3
Operating temperature
+32 °F ~ +113 °F (0 °C ~ +45 °C) / 10% ~ 90%, non-condensing
Storage temperature
-4 °F ~ 140 °F (-20 °C ~ +70 °C) / 10% ~ 90%, non-condensing
ESD protection
Human body model: / • ±8 kV (air-gap discharge) / • ±4 kV (contact discharge)
02DescriptionManufacturer's description

What it is.

No Configuration Required, Plug & Play: Works flawlessly with universal Ethernet switches, no dedicated IGMP Gigabit switch required. Set up within minutes, just plug and play.

Low Latency: The end-to-end latency (from one TX to one RX) is less than 0.1 seconds, ideal for sports programs, movies, PC games, or video presentations.

IR Remote Control: With the included IR signal emitter and receiver respectively connected to a TX and a RX, you can even control the source device at the RX side.

HDIP120D is AV Access’s brand-new economical HDMI over IP receiver (RX). It can work with an HDIP120E transmitter (TX) for one-to-one and one-to-many applications. With just a single Cat5e/6 cable, a TX/RX set can extend 1080P@60hz full HD HDMI signal up to 120m/394ft. One TX and up to 10 RXs can also work with a gigabit switch to build an extender splitter combo. It is ideal for sports bar, church, restaurant, home surveillance, broadcasting station or other scenarios where you need HDMI signal extension and splitting.

*Note: This product is just a receiver and can’t be used alone. If you also need a transmitter, please click this link for your purchase.*

Main Features

  • Works with an HDIP120E transmitter (TX) for one-to-one and one-to-many applications
  • Works easily with an Ethernet switch, no need to configure; real plug and play
  • Comes with an IR receiver for IR control

Work as Extender Splitter Combo

With the HDIP120 extender kit, you can easily transmit 1080P@60hz full HD HDMI signal up to 120m/394ft via a single Cat5e/6 cable. You can also connect one transmitter and up to 10 receivers via a gigabit switch to build an extender splitter combo. HDIP120 is ideal for sports bar, church, restaurant, home surveillance, broadcasting station or other scenarios where you need HDMI signal extension and splitting.

Set up in Minutes, Just Plug and Play

HDIP120 is designed for users without any IP knowledge, as easy as HDBaseT products. It can work flawlessly with any universal Ethernet switch, both managed and unmanaged. Don’t need to configure the IGMP protocol on your Ethernet switch for one-to-many applications any more.

Low Latency

The extender’s end-to-end latency (from one transmitter to one receiver) is less than 0.1 seconds, ideal for sports programs, movies, PC games, or video presentations.

HDMI Local Output & IR Remote Control

With the HDMI local output on the transmitter, you can connect it to a local monitor to easily preview whatever image streamed to the remote side. What’s more, with the included IR signal emitter and receiver, you can effortlessly control your source device even at the receiver side.

Connection Diagram

Application Scenarios

03Documents2 files · 662 KB

Documents and files.

Datasheets, manuals, drawings and certificates as the manufacturer publishes them.

05Talk to us
1080P AV over IP receiver with IR controlAV Access · EQ-858

Need this priced for your project?

  1. Quantity and site
  2. Configuration and interfaces
  3. Quotation