ChamSys · Control and signal

GeNetix GW2O

ModelGeNetix GW2O

GeNetix Wall Mount Node 2 is a two-port wall mount PoE powered node, available to fit into standard single gang EU/US & UK backboxes. Available with either male or female physical RDM Direct DMX ports, both versions support both DMX Input or Output.

PriceOn request

Prices on request. We confirm the configuration, availability and lead time for each project; quotations exclude installation, programming, freight and VAT unless agreed otherwise.

01VideoManufacturer's video on YouTube

ChamSys GeNetix GW2O: the manufacturer's video

ChamSys GeNetix GW2OOpen on YouTube
02SpecificationManufacturer's data · 5 groups · 21 values

What this product is, in numbers.

The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.

01Hardware Specifications3
RDM Direct DMX Ports
2
Network Ports
1 (punchdown connector)
PoE Powered
Yes
02Software Specifications6
Art-Net/sACN
Yes
ChamNet Support
Yes
Configurable DMX Timings
Yes
Web Server
Yes
DMX Redundancy Support
Yes
Unlock’s ‘demo mode’ MagicQ PC Systems
No
03EU Version Weights and Dimensions4
Width
80 mm (3.14 inches)
Depth
37.5 mm (1.48 inches)
Height
80 mm (3.14 inches)
Weight
0.15KG (0.33lb)
04UK Version Weights and Dimensions4
Width
86 mm (3.38 inches)
Depth
37.5 mm (1.48 inches)
Height
86 mm (3.38” inches)
Weight
0.15KG (0.33lb)
05US Version Weights and Dimensions4
Width
70 mm (2.76 inches)
Depth
37.5 mm (1.48 inches)
Height
115 mm (4.53 inches))
Weight
0.15KG (0.33lb)
03DescriptionManufacturer's description

What it is.

Product Information

GeNetix Wall Mount Node 2 is a two-port wall mount PoE powered node, available to fit into standard single gang EU/US & UK backboxes. Available with either male or female physical RDM Direct DMX ports, both versions support both DMX Input or Output. GeNetix Wall Mount Node 2 is ideal for any fixed installation, supporting Art-Net and sACN and configurable from ChamSys consoles, via its in-built web server or over Art-Net.

Models Available

Overview:

GeNetix Nodes

GeNetix Nodes provide a solution for remote data distribution in a wide variety of applications. Supporting industry standard protocols like Art-Net, sACN, RDM along with advanced features including DMX Fallback, Merging and Scene Storage

GeNetix Nodes Features

GeNetix Protocols

GeNetix network nodes support industry standard lighting protocols; Art-Net V1,2,3 and 4, sACN – including priorities on a per universe basis and Remote Device Management (RDM).

DMX timings are fully configurable, with refresh rate, break time, frame time and MAB.

DMX Fallback

DMX Fallback enables fixtures on a single universe to be connected in a loop to two ports on the GeNetix node for redundancy. If a single cable is broken anywhere in the DMX loop, all fixtures can still receive DMX.

Individual ports can be set to Output, Input or Fallback.

DMX Fallback is supported within a GeNetix node and also between multiple GeNetix nodes.

Merging

GeNetix nodes support merging, configurable per port. The merge options are: None, HTP, LTP, Lowest IP address, Highest IP address.

When set to HTP, for each of the channels on that universe the node uses the highest level received from all sources sending to that universe.

When set to LTP, for each of the channels the node uses the data received from the latest source. The node only changes to data from the other source when the data from that source has changed in value, or when the first source has been timed out. LTP merging is only supported for a maximum of two sources.

When set to Highest IP address or Lowest IP address the node merges each universe based on the data from the source with the highest or lowest IP address respectively. For example, a house system can be set as a very low IP address and then merging set to “highest IP” to enable incoming consoles to have priority over the house system.

Scenes

GeNetix nodes support storage of 10 Scenes that can be recorded from the incoming Art-Net or sACN data. Scenes contain DMX data for one or more ports on the node.

Scenes can be replayed from either the node front panel, from the MagicQ / QuickQ Console, via the webserver or via 10Scene wall plates on the GN5 & GN10 Nodes.

Node Configuration

The GeNetix network nodes can be configured from MagicQ consoles and PC systems and from QuickQ consoles. They can also all be configured from a web server. The nodes with a front panel can also be configured from the front panel.

GeNetix nodes also support a lock PIN to prevent the configuration being modified from the front panel of the GeNetix

Lost Data Behaviour

  • GeNetix Nodes support 3 modes for when the node loses network data (Art-Net or sACN)
  • Hold – holds the last output DMX values
  • None – stops outputting DMX
  • Zeroes – Outputs DMX 0’s on all channels

DMX synchronisation

GeNetix nodes support synchronised DMX output to reduce tearing. Synchronisation is controlled via ChamNet and is available when used with MagicQ consoles.

Specifications

GeNetix Firmware

GeNetix simplifies data distribution with a complete range of Nodes, Gateways, Switches and PoE devices. Branch out with these adaptable extensions of our growing family of intuitive networking devices.

05Talk to us
GeNetix GW2OChamSys · EQ-4718

Need this priced for your project?

  1. Quantity and site
  2. Configuration and interfaces
  3. Quotation