GeNetix TouchScene
ModelGeNetix TouchScene
GeNetix TouchScene elegantly integrates with MagicQ or QuickQ systems and GeNetix nodes for remote Scene activation.
What this product is, in numbers.
The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.
01Hardware Specifications6
- Screen Size
- 8″
- Screen Resolution
- 1280 × 800
- 48v PoE Powered
- Yes
- Power Consumption
- 10w
- Unlocks MagicQ PC Systems
- No*
- Fits EU / UK / US Single Gang Backbox
- Yes
02Software Specifications10
- Connects to MagicQ Consoles
- Yes
- Connects to QuickQ Consoles
- Yes
- Connects to GeNetix Nodes
- Yes
- Connects to MagicQ PC Systems
- Yes – Required System to be Full Unlocked
- Number of Zones when used with MagicQ Systems
- 50
- Number of Zones when used with QuickQ Consoles
- 10
- PIN Locking
- Yes – MagicQ/QuickQ Only
- Customisable Screen Saver Images
- Yes
- Inbuilt UI Layouts
- Yes
- Customisable UI Layout
- Yes – MagicQ / QuickQ Only
03Boxed Weights and Dimensions4
- Length
- 240 mm (9.44 Inches)
- Width
- 150 mm (5.90 Inches)
- Height
- 70 mm (2.75 Inches)
- Weight
- 0.6 kg (1.32 Lbs)
04Unit Weights and Dimensions5
- Length
- 200 mm (7.87 Inches)
- Width (Panel)
- 11.6 mm (0.45 Inches)
- Width (Including Rear Connector)
- 37.7 mm (1.48 Inches)
- Height
- 124.59 mm (4.90 Inches)
- Weight
- 0.4 kg (0.88 Lbs)
Show the full specificationHide the rest of the specification0 more groups · 0 values
What it is.
Product Information
When connected to GeNetix Nodes, TouchScenes can be used to toggle on/off Scenes stored on GeNetix Nodes. When TouchScenes are used with MagicQ or QuickQ controllers, additional Scene level control is available.
Whether pairing with GeNetix Nodes or ChamSys controllers, TouchScene includes inbuilt layouts that allow its 8″ touchscreen to become a surface suitable for any installation. Along with the practical advantages and aesthetic appeal of graphic display customization, GeNetix TouchScene is PoE-powered, allowing integrators to easily add remote control to installations using standard Ethernet cable for connectivity.
Overview:
TouchScene/TouchScene Mini Comparison Table
Specifications
What’s Included:
TouchScene Firmware
GeNetix TouchScene elegantly integrates with MagicQ, QuickQ and GeNetix nodes for remote Scene activation.
In the same range.
EQ-4719ChamSysGeNetix Network Passthrough Wall PlatesGeNetix Network Passthrough Wall Plates · Control and signal
EQ-4721ChamSysGeNetix TouchScene MINIGeNetix TouchScene MINI · Control and signal
EQ-4718ChamSysGeNetix GW2OGeNetix GW2O · Control and signal
EQ-4722ChamSysMagicDMX BasicMagicDMX Basic · Control and signal
GeNetix TouchSceneChamSys · EQ-4720Need this priced for your project?
- Quantity and site
- Configuration and interfaces
- Quotation






















