Eco Capture Dual HDMI M.2
Model11514
Two-channel 2K capture card
What this product is, in numbers.
The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.
01General33
- Windows 10/11/Server 2016/Server 2019/Server 2022/Server 2025 (x86 & x64) and above
- Linux x86, x64 & ARM architecture, with 2.6.35 and above
- Windows
- DirectShow
- DirectKS
- Wave API/DirectSound/WASAPI
- Linux
- V4L2
- ALSA
- VLC
- VirtualDub
- OBS
- XSplit
- vMix
- VidBlaster
- Wirecast
- Microsoft Media Encoder
- Adobe Flash Media Encoder
- Any other DirectShow/V4L2 encoding/streaming software
- Support for multiple cards plugged to one system
- On-board dip switch to set card number with 16 positions
- System hardware device tree will display “01
- Eco Capture Dual HDMI M.2” when dip switch is set to 0001, and so on
- The video and audio device names displayed in your software will include the card number (set by the dip switch)
- Hardware based 100ns high resolution clock
- Audio frames (192 audio samples) & video frames are stamped with hardware clock
- Hardware clock can be synchronized across cards (via SDK)
- Magewell Capture SDK for DirectShow (Windows) or V4L2 (Linux) for easy integration
- Magewell Capture SDK for DirectKS (Windows) or ioctl (Linux) for maximum flexibility & performance
- All options can be controlled by three levels of registry key: global level, product level and device level
- Video, Audio, Crossbar filter names can be customized via registry keys
- Multiple cards in one system can be upgraded simultaneously
- Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
- Safe upgrade. If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version. This function is only available for firmware version 1.21 and above.
02Video39
- Input features
- Support for input video resolutions up to 2048 × 2160 pixels
- 165 MHz HDMI receiver
- Adaptive HDMI equalizer, the HDMI transmission distance can be up to 30 meters
- Support for customized EDID
- Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
- Full colorimetry support
- Support for 8/10/12-bit color depths
- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
- Support for up to 8-channel IEC60958/IEC61937 audio streams via SDK
- Support for extraction of audio formation information & channel status data
- Support for extraction of video timing information
- Support for extraction of 3D format information
- Support for extraction of Sony/Canon DSLR time code
- Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode
- Support for capture image resolutions up to 2048 × 2160 pixels
- Support for capture frame rates up to 144 fps (Actual capture frame rate can be limited by PCIe bandwidth. For the resolution of 1280 × 1024 and higher, the actual frame rate may be limited by the onboard video processing hardware pixel clock. For example, the maximum frame rate of 1920 × 1080 resolution can be up to 80 fps.)
- Support for 4:2:0 8-bit capture formats: NV12, I420, YV12
- Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
- Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
- More capture formats are supported via SDK
- Video processing pipelines with ~180Mpixels/s processing bandwidth
- 8-bit 4:4:4 video processing
- Video scaling
- Video de-interlacing
- Weave
- Blend top & bottom field
- Video color format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of capture color format, quantization range & saturation range
- Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & ‘Extended gamut’ saturation range
- Video frame rate conversion
- Multiple replicated capture streams
- Unlimited capture streams for any one input channel, but the capture streams should be in the same capture format.
- ~700MB/s per channel DMA bandwidth in PCIe 2.x system
- ~400MB/s per channel DMA bandwidth in PCIe 1.x system
- Support for auto detection of Intel tiled GPU surface
- Support for DirectGMA for AMD video adapter chipsets
- Support for GPUDirect for Nvidia video adapter chipsets
03Control and interfaces12
- 2x JST SHD 20-Pin socket (Part number
- 11510)
- DVI 1.0
- HDMI 1.4a
- 2x FPC 20-Pin socket (Part number
- 11514)
- DVI 1.0
- HDMI 1.4a
- Host interface
- M.2 2280 Type M (PCIe Gen2 × 4)
- Status LEDs indicate the working state of each channel
- Pulsing slowly
- input signal unlocked
- On
- input signal locked
- Double blinks
- memory failed or FPGA configuration failed
- Off
- firmware or power supply abnormal
04Power2
- Max current at 3.3v
- ~ 1.25 A
- Max power consumption
- ~ 4.17 W
Show the full specificationHide the rest of the specification3 more groups · 7 values
05Physical1
- Form factor
- M.2 2280 standard size
06Environment3
- Operating temperature
- 0 to 40deg C
- Storage temperature
- –20 to 70 deg C
- Relative humidity
- 5% to 90% non-condensing
07Packaging3
- 2 X SHD to HDMI type A cables (31cm) (Part number
- 11510)
- 2 X FPC ribbon cables (Part number
- 11514)
- 2 X FPC to HDMI type A adapters (Part number
- 11514)
What it is.
HDMI x 2 + embedded audio x 2
Documents and files.
Datasheets, manuals, drawings and certificates as the manufacturer publishes them.
In the same range.
EQ-604MagewellPro Capture Dual SDI 4K Plus112700000 · Capture cards and devices
EQ-606MagewellEco Capture HDMI 4K M.211524 · Capture cards and devices
EQ-603MagewellPro Capture Dual HDMI 4K Plus LT112600000 · Capture cards and devices
EQ-607MagewellEco Capture Dual SDI M.2115300000 · Capture cards and devices
Eco Capture Dual HDMI M.2Magewell · EQ-605Need this priced for your project?
- Quantity and site
- Configuration and interfaces
- Quotation























