Magewell · Capture cards and devices

Eco Capture HDMI 4K M.2

Model11524

Single channel 4k capture card

PriceOn request

Prices on request. We confirm the configuration, availability and lead time for each project; quotations exclude installation, programming, freight and VAT unless agreed otherwise.

01SpecificationManufacturer's data · 7 groups · 96 values

What this product is, in numbers.

PDFEco Capture HDMI 4K M.2 Specifications3 pages · 52 KB

The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.

01General33
Windows 10/11/Server 2016/Server 2019/Server 2022/Server 2025 (x86 & x64) and above
Linux x86, x64 & ARM architecture, with 2.6.35 and above
Windows
DirectShow
DirectKS
Wave API/DirectSound/WASAPI
Linux
V4L2
ALSA
VLC
VirtualDub
OBS
XSplit
vMix
VidBlaster
Wirecast
Microsoft Media Encoder
Adobe Flash Media Encoder
Any other DirectShow/V4L2 encoding/streaming software
Support for multiple cards plugged to one system
On-board dip switch to set card number with 16 positions
System hardware device tree will display “01
Eco Capture HDMI 4K M.2” when dip switch is set to 0001, and so on
The video and audio device names displayed in your software will include the card number (set by the dip switch)
Hardware based 100ns high resolution clock
Audio frames (192 audio samples) & video frames are stamped with hardware clock
Hardware clock can be synchronized across cards (via SDK)
Magewell Capture SDK for DirectShow (Windows) or V4L2 (Linux) for easy integration
Magewell Capture SDK for DirectKS (Windows) or ioctl (Linux) for maximum flexibility & performance
All options can be controlled by three levels of registry key: global level, product level and device level
Video, Audio, Crossbar filter names can be customized via registry keys
Multiple cards in one system can be upgraded simultaneously
Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
Safe upgrade. If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version. This function is only available for firmware version 1.21 and above.
02Video42
Input features
Support for input video resolutions up to 4096 × 2160 pixels
297 MHz HDMI receiver
Adaptive HDMI equalizer
Support for customized EDID
Support for extraction of AVI/Audio/SPD/MS/VS/ACP/ISRC1/ISRC2/Gamut InfoFrames
Full colorimetry support
Support for rgb/yuv 4
4: 4 8-bit format signals with a pixel frequency of no more than 297 MHz
Support for YUV 4:2:2 12-bit format signals with a pixel frequency of no more than 297 MHz
Support for RGB/YUV 4:4:4 10/12-bit format signals with a pixel frequency of no more than 170 MHz
Support for up to 8-channel IEC60958/IEC61937 audio streams via SDK
Support for extraction of audio formation information & channel status data
Support for extraction of video timing information
Support for extraction of 3D format information
Support for extraction of Sony/Canon DSLR time code
Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode
Support for capture image resolutions up to 4096 × 2160 pixels, including
Yuy2
4096×2160p60/2160p60/1080p144/1080p60
Bgr24
4096×2160p60/2160p60/1080p144/1080p60
Support for capture frame rates up to 144 fps (Actual capture frame rate can be limited by PCIe bandwidth & image resolution)
Support for 4:2:0 8-bit capture formats: NV12, I420, YV12
Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
More capture formats are supported via SDK
video processing pipeline with ~360Mpixels/s processing bandwidth
8-bit 4:4:4 video processing
Video scaling
Video de-interlacing
Weave
Blend top & bottom field
Video color format conversion
Auto or manual selection of input color format & quantization range
Auto or manual selection of capture color format, quantization range & saturation range
Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
Support for Limited or Full quantization range
Support for Limited, Full & ‘Extended gamut’ saturation range
Video frame rate conversion
Multiple replicated capture streams
Unlimited capture streams for any one input channel, but the capture streams should be in the same capture format.
~1200MB/s per channel DMA bandwidth in PCIe 2.x system
~800MB/s per channel DMA bandwidth in PCIe 1.x system
Support for auto detection of Intel tiled GPU surface
Support for DirectGMA for AMD video adapter chipsets
Support for GPUDirect for Nvidia video adapter chipsets
03Control and interfaces12
JST SHD 20-Pin socket (Part number
11520)
DVI-D 1.0
HDMI 1.4
FPC 20-Pin socket (Part number
11524)
DVI-D 1.0
HDMI 1.4
Host interfaces
M.2 2280 Type M (PCIe Gen2 × 4)
Status LEDs indicate the working state of each channel
Pulsing slowly
input signal unlocked
On
input signal locked
Double blinks
memory failed or FPGA configuration failed
Off
firmware or power supply abnormal
04Power2
Max current at 3.3v
~ 1.12 A
Max power consumption
~ 3.75 W
Show the full specificationHide the rest of the specification3 more groups · 7 values
05Physical1
Form factor
M.2 2280 standard size
06Environment3
Operating temperature
0 to 40deg C
Storage temperature
–20 to 70 deg C
Relative humidity
5% to 90% non-condensing
07Packaging3
SHD to HDMI type A cables (31cm) (Part number
11520)
FPC ribbon cable (Part number
11524)
FPC to HDMI type A adapter (Part number
11524)
02DescriptionManufacturer's description

What it is.

HDMI + embedded audio

03Documents3 files · 974 KB

Documents and files.

Datasheets, manuals, drawings and certificates as the manufacturer publishes them.

05Talk to us
Eco Capture HDMI 4K M.2Magewell · EQ-606

Need this priced for your project?

  1. Quantity and site
  2. Configuration and interfaces
  3. Quotation