Eco Capture HDMI 4K Plus M.2
Model11590
Captures one-channel HDMI + embedded audio
What this product is, in numbers.
The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.
01General33
- ~2400MB/s per channel DMA bandwidth in PCIe 3.x system
- ~1600MB/s per channel DMA bandwidth in PCIe 2.x system
- ~800MB/s per channel DMA bandwidth in PCIe 1.x system
- Video processing pipelines with ~360Mpixels/s processing bandwidth
- Capture videos up to 4096 × 2160, frame rates up to 240 fps. Typical outputs include (actual capture frame rate can be limited by the PCIe bandwidth and internal working frequency.)
- 4096 × 2160p 5/10/15/25/29.97/30/50/60
- 3840 × 2160p 5/10/15/25/29.97/30/50/60
- 1920 × 1080p 5/10/15/25/29.97/30/50/60/120
- 1280 × 720p 5/10/15/25/29.97/30/50/60/120 etc.
- Output NV12/I420/YUYV/UYVY/RGB24/RGB32 videos
- Support custom output formats using Magewell Capture SDK
- Support custom EDID, video scaling, de-interlacing, color format conversion and frame rate conversion
- Support multiple replicated capture streams, and unlimited capture streams for any one input channel with the same format
- Support timestamp & A/V synchronization
- Hardware based 100ns high resolution clock
- Audio frames (192 audio samples) & video frames are stamped with hardware clock
- Hardware clock can be synchronized across cards via SDK
- Support firmware upgrade
- The MWCapture SDK provides functions including signal status extraction, capture configuration and real-time audio & video capture, etc
- Windows DirectShow/DirectKS/Wave API/DirectSound/WASAPI
- Linux V4L2/ALSA
- Windows 10/11/Server 2016/Server 2019/Server 2022/Server 2025 (x86 & x64) and above
- Linux (x86, x64 & ARM architecture)
- VLC
- VirtualDub
- OBS
- XSplit
- vMix
- VidBlaster
- Wirecast
- Microsoft Media Encoder
- Adobe Flash Media Encoder
- Any other DirectShow/V4L2 encoding/streaming software
02Video6
- 594MHz HDMI receiver, max input video
- 4096 × 2160 4:4:4 60 fps
- Max input audio
- 8-Channel, 24-bit HDMI embedded audio, 192 kHz sample rate
- Support input RGB/YUV 4:4:4 8-bit, YUV 4:2:2 12-bit, or RGB/YUV 4:4:4 10/12-bit signals up to 594 MHz pixel clock
- Support up to 8-channel IEC60958/IEC61937 audio streams via SDK
- Support HDR10
- HDMI input interface
- LVDS 0.5PH 20-Pin to DVI-D 1.0, HDMI 2.0
03Control and interfaces9
- Lvds 0.5ph 20-Pin (Part number
- 11580)
- DVI-D 1.0
- HDMI 2.0
- Host interfaces
- M.2 2280 Type M (PCIe Gen3 × 4)
- Status LEDs indicate the working state of each channel
- Pulsing slowly
- input signal unlocked
- On
- input signal locked
- Double blinks
- memory failed or FPGA configuration failed
- Off
- firmware or power supply abnormal
04Power2
- Max current at 3.3v
- ~ 2 A
- Max power consumption
- ~ 6.6 W
Show the full specificationHide the rest of the specification3 more groups · 6 values
05Physical1
- Form factor
- M.2 2280 standard size (22 mm × 80 mm)
06Environment3
- Operating temperature
- 0 to 60deg C
- Storage temperature
- –20 to 70 deg C
- Relative humidity
- 5% to 90% non-condensing
07Packaging2
- Lvds 0.5ph 20-Pin cable (Part number
- 11580)
- Lvds 0.5ph 20-Pin to HDMI adapter (Part number
- 11580) (20.5 cm)
What it is.
- Single channel 4Kp60 capture card
- High throughout for capture and supports higher frame rates
- M.2 2280 standard size for small or portable systems
Documents and files.
Datasheets, manuals, drawings and certificates as the manufacturer publishes them.
In the same range.
Eco Capture HDMI 4K Plus M.2Magewell · EQ-609Need this priced for your project?
- Quantity and site
- Configuration and interfaces
- Quotation



























