Eco Capture Quad SDI M.2
Model115400000
Captures SD/HD/3G/2K SDI x 4 + embedded audio
What this product is, in numbers.
The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.
01General33
- Windows 10/11/Server 2016/Server 2019/Server 2022/Server 2025 (x86 & x64) and above
- Linux x86, x64 & ARM architecture, with 2.6.35 and above
- Windows
- DirectShow
- DirectKS
- Wave API/DirectSound/WASAPI
- Linux
- V4L2
- ALSA
- VLC
- VirtualDub
- OBS
- XSplit
- vMix
- VidBlaster
- Wirecast
- Microsoft Media Encoder
- Adobe Flash Media Encoder
- Any other DirectShow/V4L2 encoding/streaming software
- Support for multiple cards plugged to one system
- On-board dip switch to set card number with 16 positions
- System hardware device tree will display “01
- Eco Capture Quad SDI M.2” when dip switch is set to 0001, and so on
- The video and audio device names displayed in your software will include the card number (set by the dip switch)
- Hardware based 100ns high resolution clock
- Audio frames (192 audio samples) & video frames are stamped with hardware clock
- Hardware clock can be synchronized across cards (via SDK)
- Magewell Capture SDK for DirectShow (Windows) or V4L2 (Linux) for easy integration
- Magewell Capture SDK for DirectKS (Windows) or ioctl (Linux) for maximum flexibility & performance
- All options can be controlled by three levels of registry key: global level, product level and device level
- Video, Audio, Crossbar filter names can be customized via registry keys
- Multiple cards in one system can be upgraded simultaneously
- Cards can be upgraded without a system power shutdown (In most cases, even a reboot is not needed)
- Safe upgrade. If power off or system break down occur when the firmware is being upgraded, it will automatically restore to the initial version.
02Video43
- Input features
- Support for input video resolutions up to 2048 × 1080 pixels
- Integrated cable equalizer extending the cable length as follows
- up to 330 m for SD-SDI signals
- up to 190 m for HD-SDI signals
- up to 150 m for 3G-SDI signals
- Support for SD/HD/3Ga/3Gb/3Gb-DL/3Gb-DS standards
- Support for 2K (2048 × 1080) mode
- Support for RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
- Support for 10/12-bit color depth
- Support for extraction of SMPTE 352 payload identifier
- Support for up to 8 (mono) audio channels at 48KHz
- Support for extraction of audio formation information & channel status data
- Limited support of 3Gb-DS
- only the first stream can be captured
- Limited support for capture of the first link of dual link interfaces
- YCbCr 4:2:2 10-bit 1080p 50/59.94/60: captured as 1080i 50/59.94/60
- YCbCr 4:4:4 10-bit: captured as 4:2:2
- RGB 4:4:4: R/B sub-sampled
- Support for Closed Caption via SDK
- Support for capture image resolutions up to 2048 × 1080 pixels
- Support for capture frame rates up to 144 fps (Actual capture frame rate can be limited by PCIe bandwidth. For the resolution of 1280 × 1024 and higher, the actual frame rate may be limited by the onboard video processing hardware pixel clock. For example, the maximum frame rate of 1920 × 1080 resolution can up to 80 fps.)
- Support for 4:2:0 8-bit capture formats: NV12, I420, YV12
- Support for 4:2:2 8-bit capture formats: YUY2, YUYV, UYVY
- Support for 4:4:4 8-bit capture formats: V308, IYU2, V408, BGR24, BGR32
- More capture formats are supported via SDK
- Video processing pipelines with ~180Mpixels/s processing bandwidth
- 10-bit 4:4:4 video processing
- Video scaling
- Video de-interlacing
- Weave
- Blend top & bottom field
- Video color format conversion
- Auto or manual selection of input color format & quantization range
- Auto or manual selection of capture color format, quantization range & saturation range
- Support for RGB, YCbCr 601, YCbCr 709, YCbCr 2020 color formats
- Support for Limited or Full quantization range
- Support for Limited, Full & ‘Extended gamut’ saturation range
- Video frame rate conversion
- Multiple replicated capture streams
- Unlimited capture streams for any one input channel, but the capture streams should be in the same capture format.
- ~400MB/s per channel DMA bandwidth in PCIe 2.x system
- ~200MB/s per channel DMA bandwidth in PCIe 1.x system
- Support for auto detection of Intel tiled GPU surface
- Support for DirectGMA for AMD video adapter chipsets
- Support for GPUDirect for Nvidia video adapter chipsets
03Control and interfaces8
- 4x MMCX
- SD/HD/3G/2K SDI
- Host interfaces
- M.2 2280 Type M (PCIe Gen2 × 4)
- Status LEDs indicate the working state of each channel
- Pulsing slowly
- input signal unlocked
- On
- input signal locked
- Double blinks
- memory failed or FPGA configuration failed
- Off
- firmware or power supply abnormal
04Power2
- Max current at 3.3v
- ~ 2.17 A
- Max power consumption
- ~ 7.16 W
Show the full specificationHide the rest of the specification3 more groups · 5 values
05Physical1
- Form factor
- M.2 2280 standard size
06Environment3
- Operating temperature
- 0 to 40deg C
- Storage temperature
- –20 to 70 deg C
- Relative humidity
- 5% to 90% non-condensing
07Packaging1
- Accessories
- 4 X MMCX to BNC cables (32 cm)
What it is.
Four-channel 2K capture card
Documents and files.
Datasheets, manuals, drawings and certificates as the manufacturer publishes them.
In the same range.
Eco Capture Quad SDI M.2Magewell · EQ-608Need this priced for your project?
- Quantity and site
- Configuration and interfaces
- Quotation
























