Magewell · Encoders, decoders and streaming

Pro Convert HDMI TX

Model640500000

Converts an HD HDMI input signal into Full NDI®

PriceOn request

Prices on request. We confirm the configuration, availability and lead time for each project; quotations exclude installation, programming, freight and VAT unless agreed otherwise.

01SpecificationManufacturer's data · 7 groups · 50 values

What this product is, in numbers.

PDFPro Convert HDMI TX Specifications2 pages · 47 KB

The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.

01General4
NDI Studio Monitor
OBS
vMix
Any other NDI-enabled product
02Video15
Max video input
2048 × 1200 60 fps 4:4:4/4:2:2
Input video at any format by custom EDID of input port
Video formats
RGB, YUV BT.601/709/2020
8-channel HDMI-embedded audio
HDMI interface
HDMI 1.4, DVI-D
Encoding NDI High Bandwidth real-time stream at up to 2048 × 1200 60 fps 4:2:2 8-bit.
Output the same resolution as input or any custom resolution. Typical outputs include
2048 × 1080p/1920 × 1080p 23.98/24/25/29.97/30/50/59.94/60
1920 × 1080i 25/29.97/30/50/59.94/60
1280 × 720p 23.98/24/25/29.97/30/50/59.94/60/100/119.88/120
720 × 480p/720 × 480i 59.94/60/119.88/120
720 × 576p/720 × 576i 50/100
Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate
Encoding 2-channel NDI-embedded audio
Support NDI 6.3
03Control and interfaces19
Register with Control Hub
Remote control via WebUI and Control Hub
Provide comprehensive information regarding the device and input signals in real-time
Allow to configure how an input is processed and encoded, including deinterlacing, EDID, up/down scaling, frame rate, aspect ratio, as well as the network connection
Update firmware
Support USB RNDIS/ECM
Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
Provide HTTP APIs
16 position rotary DIP switch
set board-index from 0 to F
Control PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI
Mini-DIN–8 jack (shared with Tally light)
10/100/1000 Mbps Ethernet
IEEE 802.3af PoE
USB2.0 Type B
5 V/2.1 A power supply
USB RNDIS/ECM
Status LEDs indicate
Power supply
on/off
Input signal
locked/unlocked
04Power2
5V max current
~1.5 A
Max power consumption
~6 W
Show the full specificationHide the rest of the specification3 more groups · 10 values
05Physical2
Form factor
100.9smm (L) × 60.2 mm (W) × 23.3 mm (H)
Screw mounting hole
¼–20 threaded hole
06Environment3
Operating temperature
0 to 40 deg C
Storage temperature
–20 to 70 deg C
Relative humidity
5% to 90% non-condensing
07Packaging5
USB 2.0 A to B cable
5 V/2.1 A power adaptor
Mini-DIN 8 breakout cable
Tally light
L-bracket
02DescriptionManufacturer's description

What it is.

  • Supports up to 2048x1200 60fps input signals
  • Connects existing source equipment into NDI-enabled, IP-based media networks
  • Plug-and-play ease of use with automatic input format detection and DHCP network configuration
03Documents5 files · 2.7 MB

Documents and files.

Datasheets, manuals, drawings and certificates as the manufacturer publishes them.

05Talk to us
Pro Convert HDMI TXMagewell · EQ-635

Need this priced for your project?

  1. Quantity and site
  2. Configuration and interfaces
  3. Quotation