Pro Convert SDI TX
Model640600000
Converts one-channel of 3G-SDI input signal into Full NDI®
What this product is, in numbers.
The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.
01General4
- NDI Studio Monitor
- OBS
- vMix
- Any other NDI-enabled product
02Video22
- Max video input
- 2048 × 1080 60 fps. Supported resolutions include
- 2048 × 1080p/1920 × 1080p 23.98/24/25/29.97/30/47.95/48/50/59.94/60
- 2048 × 1080i/1920 × 1080i 23.98/24/25/29.97/30/47.95/48/50/59.94/60
- 1280 × 720p 50/59.94/60
- 720 × 576 25p/50i (PAL SD)
- 720 × 480 29.97p/59.94i (NTSC SD)
- Support RGB/RGBA/YUV/YUVA signals with 10/12-bit color depth
- Support RGB 4:4:4, YCbCr 4:4:4, YCbCr 4:2:2 color sampling
- Support RGB, YUV BT.601/709/2020 video input
- 16-channel SDI embedded audio inputs
- SD/HD/3G-SDI BNC input
- Support SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425) SDI standards
- Receive 3G-SDI transmitted up to 180 m (591 ft)
- Encoding NDI High Bandwidth real-time stream at up to 2048 × 1080 60 fps 4:2:2 8-bit
- Output the same resolution as input or any custom resolution. Typical outputs include
- 2048 × 1080p/1920 × 1080p 23.98/24/25/29.97/30/47.95/48/50/59.94/60
- 2048 × 1080i/1920 × 1080i 25/29.97/30/47.95/48/50/59.94/60
- 1280 × 720p 50/59.94/60
- Output frame rate same as the original, 1/2, 1/3 or 1/4 of input frame rate
- Support HDR HLG
- Encoding 16-channel NDI-embedded audio
- Support NDI 6.3
03Control and interfaces19
- Register with Control Hub
- Remote control via WebUI and Control Hub
- Provide comprehensive information regarding the device and signals in real-time
- Allow to configure how an input is processed and encoded, including deinterlacing, up/down scaling, frame rate, aspect ratio, as well as the network connection
- Update firmware
- Support USB RNDIS/ECM
- Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
- Provide HTTP APIs
- 16 position rotary DIP switch
- set board-index from 0 to F
- Control PTZ cameras using protocols of VISCA, Visca UDP, Visca UDP2rs232, PELCO-P and PELCO-D via NDI
- Mini-DIN–8 jack (shared with Tally light)
- 10/100/1000 Mbps Ethernet
- IEEE 802.3af PoE
- USB2.0 Type B
- 5 V/2.1 A power supply
- USB RNDIS/ECM
- Status LEDs indicate
- Power supply
- on/off
- Input signal
- locked/unlocked
04Power2
- 5V max current
- ~1.5 A
- Max power consumption
- ~7 W
Show the full specificationHide the rest of the specification3 more groups · 10 values
05Physical2
- Dimensions (L × W × H)
- 100.9 × 60.2 × 23.3 mm
- Screw mounting hole
- ¼–20 threaded hole
06Environment3
- Operating temperature
- 0 to 40 deg C
- Storage temperature
- –20 to 70 deg C
- Relative humidity
- 5% to 90% non-condensing
07Packaging5
- USB 2.0 A to B cable
- 5 V/2.1 A power adaptor
- Mini-DIN 8 breakout cable
- Tally light
- L-bracket
What it is.
- Supports up to 2048x1080 60fps input signals
- Connects existing source equipment into NDI-enabled, IP-based media networks
- Plug-and-play ease of use with automatic input format detection and DHCP network configuration
Documents and files.
Datasheets, manuals, drawings and certificates as the manufacturer publishes them.
In the same range.
EQ-635MagewellPro Convert HDMI TX640500000 · Encoders, decoders and streaming
EQ-637MagewellPro Convert 12G SDI 4K Plus64090 · Encoders, decoders and streaming
EQ-634MagewellPro Convert SDI Plus640400000 · Encoders, decoders and streaming
EQ-638MagewellPro Convert for NDI® to AIO642100000 · Encoders, decoders and streaming
Pro Convert SDI TXMagewell · EQ-636Need this priced for your project?
- Quantity and site
- Configuration and interfaces
- Quotation



























