Pro Convert for NDI® to AIO
Model642100000
Converts a live IP stream into HDMI and SDI signals
What this product is, in numbers.
The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.
01Video22
- Max output
- 1920 × 1080p60
- Delivery video within 2K at the preferred video format according to the EDID of the connected monitor
- Support YUV BT.601, YUV BT.709 signal
- Support 48KHz 8-channel audio output
- HDMI interface
- HDMI 1.4
- Max output
- 1920 × 1080p60. Supported output formats are
- 1920 × 1080p 23.98/24/25/29.97/30/50/59.94/60
- 1920 × 1080i 50/59.94/60
- 1280 × 720p 23.98/24/25/29.97/30/50/59.94/60
- 720 × 576i50
- 720 × 480i59.94
- Support YUV BT.601/709 signal
- Support 48KHz 8-channel audio output
- SD/HD/3G-SDI BNC output
- Support SD (ST 259)/HD (ST 292)/3Ga (ST 425)/3Gb (ST 425)/3Gb-DL (ST 425)/3Gb-DS (ST 425) SDI standards
- Support Native CEA–608/608 over 708 captions
- Output 3G-SDI signal and transmitted distance at 130 m (427 ft)
- Decoding up to 2Kp60 streams of NDI High Bandwidth, NDI HX, NDI HX2, NDI HX3, RTSP, HTTP, HLS, RTMP Pull/Push, and MPEG-TS over UDP/SRT/RTP protocols
- Simultaneously decode and output HDMI and SDI signals
- SpeedHQ/H.264/H.265 video decoders
- AAC/MP3 audio decoders
- Support NDI 6.3
02Control and interfaces23
- Register with Control Hub
- Remote control via WebUI and Control Hub
- Provide comprehensive information regarding the device and decoded signals in real-time
- Allow to configure how a signal is decoded and output, including OSD settings, deinterlacing, resolutions, audio gain, sample rate, and channel mapping, as well as the network connection
- Update firmware
- Support USB RNDIS/ECM
- Support IE/Edge/Firefox/Chrome/Safari/Opera web browsers
- Provide HTTP APIs
- Menu
- press to display the menu, or cycle through the options
- Select
- press to display the menu, enter current option, or confirm the selection
- 16 position rotary DIP switch
- set board-index from 0 to F
- 10/100/1000 Mbps Ethernet
- IEEE 802.3af PoE
- USB2.0 Type B
- 5 V/2.1 A power supply
- USB RNDIS/ECM
- Power LED status indicator
- On
- power connected
- Off
- power unconnected
- Decode LED status indicator
- On
- decoding
- Blinks
- decoding error
- Off
- source unselected
03Power2
- 5V max current
- ~1.05 A
- Max power consumption
- ~5.5 W
04Physical2
- Dimensions (L × W × H)
- 100.9 × 60.2 × 23.3 mm
- Screw mounting hole
- ¼–20 threaded hole
05Environment3
- Operating temperature
- 0 to 40 deg C
- Storage temperature
- –20 to 70 deg C
- Relative humidity
- 5% to 90% non-condensing
06Packaging3
- USB 2.0 A to B cable
- 5 V/2.1 A power adaptor
- L-bracket
Show the full specificationHide the rest of the specification0 more groups · 0 values
What it is.
- Connects baseband presentation or distribution equipment into IP-based media networks
- Supports NDI technology including NDI High Bandwidth and NDI HX mode
- Supports streaming protocols including SRT, RTSP, RTMP, UDP, RTP, HLS and HTTP
Documents and files.
Datasheets, manuals, drawings and certificates as the manufacturer publishes them.
In the same range.
EQ-637MagewellPro Convert 12G SDI 4K Plus64090 · Encoders, decoders and streaming
EQ-639MagewellPro Convert IP to AIO 4K644000000 · Encoders, decoders and streaming
EQ-636MagewellPro Convert SDI TX640600000 · Encoders, decoders and streaming
EQ-640MagewellPro Convert IP to HDMI 4K644100000 · Encoders, decoders and streaming
Pro Convert for NDI® to AIOMagewell · EQ-638Need this priced for your project?
- Quantity and site
- Configuration and interfaces
- Quotation

























