GeNetix TouchScene MINI
ModelGeNetix TouchScene MINI
GeNetix TouchScene MINI seamlessly integrates with MagicQ or QuickQ systems and GeNetix nodes for remote Scene activation.
What this product is, in numbers.
The manufacturer's published values. We confirm the configuration and the values that matter for your project before an order.
01Hardware Specifications7
- Screen Size
- 4″
- Screen Resolution
- 480 × 480
- 48v PoE Powered
- Yes
- Power Consumption
- 4w
- Unlocks MagicQ PC Systems
- No*
- Fits EU / UK Single Gang Backbox
- Yes
- Fits US Dual Gang Backbox
- Yes (with supplied adapter plate)
02Software Specifications10
- Connects to MagicQ Consoles
- Yes
- Connects to QuickQ Consoles
- Yes
- Connects to GeNetix Nodes
- Yes
- Connects to MagicQ PC Systems
- Yes – Required System to be Full Unlocked
- Number of Zones when used with MagicQ Systems
- 50
- Number of Zones when used with QuickQ Consoles
- 10
- PIN Locking
- Yes – MagicQ/QuickQ Only
- Customisable Screen Saver Images
- Yes
- Inbuilt UI Layouts
- Yes
- Customisable UI Layout
- Yes – MagicQ / QuickQ Only
03Boxed Weights and Dimensions4
- Width
- 143 mm (5.62 Inches)
- Depth
- 130 mm (5.11 Inches)
- Height
- 75 mm (2.95 Inches)
- Weight
- 0.3 kg (0.66 Lbs)
04Unit Weights and Dimensions5
- Width
- 85 mm (3.34 Inches)
- Depth
- (Front Panel): 11 mm (0.43 Inches)
- Depth Including Rear Connector
- 35 mm (1.38 Inches)
- Height
- 85 mm (3.34 Inches)
- Weight
- 0.1 kg (0.22 Lbs)
Show the full specificationHide the rest of the specification0 more groups · 0 values
What it is.
Product Information
When connected to GeNetix Nodes, TouchScenes can be used to toggle on/off Scenes stored on GeNetix Nodes. When TouchScenes are used with MagicQ or QuickQ controllers, additional Scene level control is available.
Whether pairing with GeNetix Nodes or ChamSys controllers, TouchScene MINI includes inbuilt layouts that allow its 4″ touchscreen to become a surface suitable for any installation. Along with the practical advantages and aesthetic appeal of graphic display customization, GeNetix TouchScene MINI is PoE-powered, allowing integrators to easily add remote control to installations using standard Ethernet cable for connectivity.
Overview:
TouchScene/TouchScene Mini Comparison Table
Specifications
What’s Included:
TouchScene Firmware
GeNetix TouchScene elegantly integrates with MagicQ, QuickQ and GeNetix nodes for remote Scene activation.
In the same range.
EQ-4720ChamSysGeNetix TouchSceneGeNetix TouchScene · Control and signal
EQ-4722ChamSysMagicDMX BasicMagicDMX Basic · Control and signal
EQ-4719ChamSysGeNetix Network Passthrough Wall PlatesGeNetix Network Passthrough Wall Plates · Control and signal
EQ-4723ChamSysMagicDMX FullMagicDMX Full · Control and signal
GeNetix TouchScene MINIChamSys · EQ-4721Need this priced for your project?
- Quantity and site
- Configuration and interfaces
- Quotation






















